Metallische Werkstoffe
Metallische Werkstoffe
news
Metallische Werkstoffe Metallische Werkstoffe
research
Metallische Werkstoffe Metallische Werkstoffe
publications
Metallische Werkstoffe Metallische Werkstoffe
equipment
Metallische Werkstoffe Metallische Werkstoffe
courses
Metallische Werkstoffe Metallische Werkstoffe
theses
Metallische Werkstoffe Metallische Werkstoffe
contact Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
Publications
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2023
„Thermodynamically Guided Improvement of Fe–Mn–Al–Ni Shape‐Memory Alloys“
A. Walnsch, A. Bauer, J. Freudenberger, K. Freiberg, C. WĂŒstefeld, M. Vollmer, S. Lippmann, T. Niendorf, A. Leineweber, M. J. Kriegel
Advanced Materials (2023)
Metallische Werkstoffe
„P-Pt Binary Phase Diagram Evaluation“
L. Schmitt, K. Hack, S. Lippmann
MSI Eureka (2023) 20.30461.1.1
Metallische Werkstoffe
„Modelling of the Solidifying Microstructure of Inconel 718: Quasi-Binary Approximation“
N. Kropotin, Y. Fang, C. Yu, M. Seyring, K. Freiberg, S. Lippmann, T. Pinomaa, A. Laukkanen, N. Provatas, P. K. Galenko
Modelling 3 (2023) 323-335
Metallische Werkstoffe
„The shape of dendritic tips: the role of external impacts“
D. V. Alexandrov, A. Kao, P. K. Galenko, S. Lippmann, I. O. Starodumov, G. Demange, L. V. Toropova
The European Physical Journal Special Topics 8 (2023) 1273-1279
Metallische Werkstoffe
„Improving Oxidation Resistance of Low Fe-Si Alloys by Preheating Treatment“
C. L. Li, W. Ma, Z. H. Liu, K. E. Freiberg, G. J. Liu, X. Y. Lang, S. Lippmann, Y. F. Zhu, Q. Jiang
Metallurgical and Materials Transactions A 8 (2023) 3261-3270
Metallische Werkstoffe
„Vibratory polishing of multiphase CuZn30//CuZn80 diffusion pairs for electron backscatter diffraction (EBSD) characterization“
J. Möbius, S. Lippmann, M. Seyring
Practical Metallography 6 (2023) 363-381
Metallische Werkstoffe
„Surface amorphization of bulk NiTi induced by laser radiation“
R. Wonneberger, W. Wisniewski, S. Lippmann, F. A. MĂŒller, S. GrĂ€f, A. Undisz
Surfaces and Interfaces (2023) 102827
Metallische Werkstoffe
„Fabrication of Single‐Crystalline CoCrFeNi Thin Films by DC Magnetron Sputtering: A Route to Surface Studies of High‐Entropy Alloys“
H. Schwarz, J. Apell, H. K. Wong, P. Henning, R. Wonneberger, N. Rösch, T. Uhlig, F. Ospald, G. Wagner, A. Undisz, T. Seyller
Advanced Materials 36 (2023)
Metallische Werkstoffe
„Microstructure and Early-Stage Oxidation Behavior of Co-Cr-Cu-Fe-Mn-Ni High-Entropy Alloys“
J. Apell, R. Wonneberger, M. PĂŒgner, T. Lampke, S. Lippmann, A. Undisz
JOM 12 (2023) 5439-5450
Metallische Werkstoffe
„Effect of Co vs. Fe content on early stages of oxidation of Co-Cr-Fe-Mn-Ni-Si complex concentrated alloys at 800 °C“
J. Apell, R. Wonneberger, H. Stöcker, P. Meye, K. Freiberg, M. Seyring, S. Lippmann, A. Undisz
Corrosion Science (2023) 111594
Metallische Werkstoffe
„Formation of laser-induced periodic surface structures on Zr-based bulk metallic glasses with different chemical composition“
M. Wolff, R. Wonneberger, K. Freiberg, A. Hertwig, J. Bonse, L. Giebeler, A. Koitzsch, C. Kunz, H. Weber, J. Hufenbach, F. MĂŒller, S. GrĂ€f
Surfaces and Interfaces (2023) 103305
Metallische Werkstoffe
„Microstructure and Early-Stage Oxidation Behavior of Co-Cr-Cu-Fe-Mn-Ni High-Entropy Alloys“
J. Apell, R. Wonneberger, M. PĂŒgner, T. Lampke, S. Lippmann, A. Undisz
JOM 12 (2023) 5439-5450
Metallische Werkstoffe
„Covalent Functionalization of CdSe Quantum Dot Films with Molecular [FeFe] Hydrogenase Mimics for Light-Driven Hydrogen Evolution“
S. Benndorf, A. Schleusener, R. MĂŒller, M. Micheel, R. Baruah, J. Dellith, A. Undisz, C. Neumann, A. Turchanin, K. Leopold, W. Weigand, M. WĂ€chtler
ACS Applied Materials & Interfaces 15 (2023) 18889-18897
Metallische Werkstoffe
„Phase formation in the Ni-enriched zone below the surface oxide on NiTi“
K. Freiberg, M. Seyring, R. Wonneberger, M. Rettenmayr, A. Undisz
Intermetallics (2023) 107817
Metallische Werkstoffe
„Tracing spatial confinement in semiconductor quantum dots by high-order harmonic generation“
H. N. Gopalakrishna, R. Baruah, C. HĂŒnecke, V. Korolev, M. ThĂŒmmler, A. Croy, M. Richter, F. Yahyaei, R. Hollinger, V. Shumakova, I. Uschmann, H. Marschner, M. ZĂŒrch, C. Reichardt, A. Undisz, J. Dellith, A. PugĆŸlys, A. BaltuĆĄka, C. Spielmann, U. Peschel, S. GrĂ€fe, M. WĂ€chtler, D. Kartashov
Physical Review Research 1 (2023)
Metallische Werkstoffe
„How to grow single-crystalline and epitaxial NiTi films in (100)- and (111)-orientation“
K. LĂŒnser, A. Undisz, K. Nielsch, S. FĂ€hler
Journal of Physics: Materials 3 (2023) 035002
Metallische Werkstoffe
„Solving the puzzle of hierarchical martensitic microstructures in NiTi by (111)-oriented epitaxial films“
K. LĂŒnser, A. Undisz, M. F. Wagner, K. Nielsch, S. FĂ€hler
Materials Today Advances (2023) 100441
Metallische Werkstoffe
„Fabrication of Single‐Crystalline CoCrFeNi Thin Films by DC Magnetron Sputtering: A Route to Surface Studies of High‐Entropy Alloys“
H. Schwarz, J. Apell, H. K. Wong, P. Henning, R. Wonneberger, N. Rösch, T. Uhlig, F. Ospald, G. Wagner, A. Undisz, T. Seyller
Advanced Materials 36 (2023)
Metallische Werkstoffe
„Early oxidation stages of austenitic stainless steel monitored using Mn as tracer“
R. Wonneberger, G. Kirste, M. Seyring, M. Hafermann, C. Ronning, M. Schaal, F. Otto, T. Fritz, A. Undisz
Corrosion Science (2023) 111434
Metallische Werkstoffe
„Structural transformations and non-equilibrium phenomena in multicomponent disordered systems“
L. V. Toropova, I. G. Nizovtseva
The European Physical Journal Special Topics 8 (2023) 1105-1108
Metallische Werkstoffe
„Assessing the Mass Transfer Coefficient in Jet Bioreactors with Classical Computer Vision Methods and Neural Networks Algorithms“
I. Nizovtseva, V. Palmin, I. Simkin, I. Starodumov, P. Mikushin, A. Nozik, T. Hamitov, S. Ivanov, S. Vikharev, A. Zinovev, V. Svitich, M. Mogilev, M. Nikishina, S. Kraev, S. Yurchenko, T. Mityashin, D. Chernushkin, A. Kalyuzhnaya, F. Blyakhman
Algorithms 3 (2023) 125
Metallische Werkstoffe
„Influence of the gas–liquid non-equilibrium media structure on the mass transfer dynamics in biophysical processes“
I. G. Nizovtseva, I. O. Starodumov, S. I. Lezhnin, P. V. Mikushin, A. N. Zagoruiko, P. A. Shabadrov, V. Y. Svitich, S. V. Vikharev, V. V. Tatarintsev, M. A. Nikishina, I. Y. Koroznikova, A. Y. Glebova, T. V. Mityashin, Y. Jingyan, D. V. Chernushkin
Smart Materials and Structures 1 (2023) 015028
Metallische Werkstoffe
„Convection effect on solidification microstructure: dendritic arm spacing and microsegregation“
P. K. Galenko
The European Physical Journal Special Topics 8 (2023) 1261-1271
Metallische Werkstoffe
„The impact of convection on morphological instability of a planar crystallization front“
E. V. Makoveeva, D. V. Alexandrov, P. K. Galenko
International Journal of Heat and Mass Transfer (2023) 124654
Metallische Werkstoffe
„Off-Eutectic Growth Model for Solidifying Alloy from an Undercooled State“
J. Xu, P. K. Galenko
Crystals 10 (2023) 1453
Metallische Werkstoffe
„Density Testing Method for Undercooling Solidification of High-Temperature Metal Melts“
T. Niu, J. Xu, Z. Yao, Z. Jian, P. K. Galenko
Crystals 10 (2023) 1502
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
2022
„Observation of Pattern Formation during Electromagnetic Levitation Using High-Speed Thermography“
Y. Fang, D. Liu, Y. Zhu, P. K. Galenko, S. Lippmann
Crystals 12 (2022) 1691
Metallische Werkstoffe
„Formation of Nanoscale Al2O3 Protective Layer by Preheating Treatment for Improving Corrosion Resistance of Dilute Fe-Al Alloys“
C. Li, K. Freiberg, Y. Tang, S. Lippmann, Y. Zhu
Materials 22 (2022) 7978
Metallische Werkstoffe
„Anomalous kinetics, patterns formation in recalescence, and final microstructure of rapidly solidified Al-rich Al-Ni alloys“
P. Galenko, L. Toropova, D. Alexandrov, G. Phanikumar, H. Assadi, M. Reinartz, P. Paul, Y. Fang, S. Lippmann
Acta Materialia (2022) 118384
Metallische Werkstoffe
„Formation of a nanoscale two-phase microstructure in Cu–Zn( Al) samples with macroscopic concentration gradient“
A. Walnsch, T. Kaaden, P. D. Fischer, M. Motylenko, M. Seyring, A. Leineweber, S. Lippmann
Materials Characterization (2022) 112229
Metallische Werkstoffe
„Effect of heat treatment on oxidation resistance of magnesium alloys with additions of calcium oxide“
S. Liu, G. Liu, C. Yu, S. Lippmann, Y. Zhu, Q. Jiang
Corrosion Science (2022) 110558
Metallische Werkstoffe
„Evolution of a Polydisperse Ensemble of Spherical Particles in a Metastable Medium with Allowance for Heat and Mass Exchange with the Environment“
D. V. Alexandrov, A. A. Ivanov, I. G. Nizovtseva, S. Lippmann, I. V. Alexandrova, E. V. Makoveeva
Crystals 7 (2022) 949
Metallische Werkstoffe
„Bifacial Dye Membranes: Ultrathin and Free‐Standing although not Being Covalently Bound“
M. L. Hupfer, J. Dellith, M. Seyring, M. Diegel, A. Dellith, S. Ghosh, M. Rettenmayr, B. Dietzek‐ivanơić, M. Presselt
Advanced Materials 1 (2022)
Metallische Werkstoffe
„Low-energy ion channeling in nanocubes“
S. Choupanian, W. Möller, M. Seyring, C. Ronning
Nano Research 1 (2022) 1522-1526
Metallische Werkstoffe
„A review of continuous modeling of periodic pattern formation with modified phase-field crystal models“
I. Starodumov, V. Ankudinov, I. Nizovtseva
The European Physical Journal Special Topics 6 (2022) 1135-1145
Metallische Werkstoffe
„Approximate analytical solution of the integro‐differential model of bulk crystallization in a metastable liquid with mass supply (heat dissipation) and crystal withdrawal mechanism“
I. G. Nizovtseva, A. A. Ivanov, I. V. Alexandrova
Mathematical Methods in the Applied Sciences 13 (2022) 8170-8178
Metallische Werkstoffe
„Simulation of two‐phase air–liquid flows in a closed bioreactor loop: Numerical modeling, experiments, and verification“
I. G. Nizovtseva, I. O. Starodumov, A. Y. Schelyaev, A. A. Aksenov, S. V. Zhluktov, M. L. Sazonova, O. N. Kashinsky, L. S. Timkin, V. G. Gasenko, R. S. Gorelik, D. V. Chernushkin, I. Y. Oshkin
Mathematical Methods in the Applied Sciences 13 (2022) 8216-8229
Metallische Werkstoffe
„Measurement of Mass Transfer Intensity in Gas–Liquid Medium of Bioreactor Circuit Using the Thermometry Method“
I. Starodumov, I. Nizovtseva, S. Lezhnin, S. Vikharev, V. Svitich, P. Mikushin, D. Alexandrov, N. Kuznetsov, D. Chernushkin
Fluids 12 (2022) 366
Metallische Werkstoffe
„Dimensional Stability of Mirror Substrates Made of Silicon Particle Reinforced Aluminum“
J. Kinast, A. TĂŒnnermann, A. Undisz
Materials 9 (2022) 2998
Metallische Werkstoffe
„Enhancement of hydrogen permeation stability at high temperatures for Pd/Nb30Ti35Co35/Pd composite membranes by HfN intermediate layer“
X. Liang, X. Li, R. Chen, H. Nagaumi, J. Guo, D. Liu
Journal of Membrane Science (2021) 120062
Metallische Werkstoffe
„Substantial enhancement of hydrogen permeability of Mo2C/V composite membranes by ion beam sputtering“
X. Yin, X. Li, X. Liang, R. Chen, H. Nagaumi, B. Li, J. Guo, D. Liu
Journal of Membrane Science (2022) 120312
Metallische Werkstoffe
„Structure and properties of niobium carbide coated vanadium composite membranes for high temperature hydrogen separation“
J. Liu, X. Li, X. Liang, H. Fu, M. Rettenmayr, D. Liu
Journal of Alloys and Compounds (2021) 163530
Metallische Werkstoffe
„Magnetron sputtering deposition of Mo2N catalytic films on vanadium foils for high temperature hydrogen separation“
L. Zhang, X. Liang, D. Liu, H. Nagaumi, X. Li
Vacuum (2022) 111232
Metallische Werkstoffe
„A two-step electroless plating method for Pd composite membranes with enhanced hydrogen selectivity and superior high-temperature stability“
Y. Yang, X. Li, X. Liang, R. Chen, J. Guo, H. Fu, D. Liu
Journal of Environmental Chemical Engineering 5 (2022) 108477
Metallische Werkstoffe
„Preparation of thin (∌2 Όm) Pd membranes on ceramic supports with excellent selectivity and attrition resistance“
Y. Yang, X. Li, X. Liang, R. Chen, J. Guo, H. Fu, D. Liu
International Journal of Hydrogen Energy 2 (2022) 662-675
Metallische Werkstoffe
„Nanocrystalline vanadium carbides as highly active catalysts on vanadium foils for high temperature hydrogen separation“
H. Huang, X. Li, X. Liang, H. Nagaumi, H. Fu, D. Liu
Separation and Purification Technology (2022) 122778
Metallische Werkstoffe
„Microstructure and hydrogen transport properties of (V90Cr5Al5)90Cu10 alloy membranes“
X. Liang, F. Huang, S. Xu, J. Guo, D. Liu, X. Li
Journal of Alloys and Compounds (2022) 168684
Metallische Werkstoffe
„Anomalous Dynamics of Recalescence Front in Crystal Growth Processes: Theoretical Background“
D. V. Alexandrov, P. K. Galenko, L. V. Toropova
Crystals 12 (2022) 1686
Metallische Werkstoffe
„A Stable Mode of Dendritic Growth in Cases of Conductive and Convective Heat and Mass Transfer“
L. V. Toropova, P. K. Galenko, D. V. Alexandrov
Crystals 7 (2022) 965
Metallische Werkstoffe
„Selection of a Stable Dendritic Growth Mode under Convective Heat-and-Mass Transfer Conditions“
L. V. Toropova, D. V. Alexandrov, P. K. Galenko
Russian Metallurgy (Metally) 2 (2022) 69-77
Metallische Werkstoffe
„Amorphization and nanocrystal formation in a Pd–Ni–Cu–P alloy after cooling under different conditions“
E. V. Kharanzhevskiy, P. K. Galenko, M. Rettenmayr, S. Koch, R. Wonneberger, M. V. Zamoryanskaya, M. A. Yagovkina, D. A. Kirilenko, V. A. Bershtein, P. N. Yakushev, L. M. Egorova, K. N. Orekhova, V. G. Lebedev, A. V. Egorov, A. S. Senchenkov
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 2217 (2022)
Metallische Werkstoffe
„Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys“
Y. Fang, P. K. Galenko, D. Liu, K. Hack, M. Rettenmayr, S. Lippmann
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 2217 (2022)
Metallische Werkstoffe
„Rapid eutectic growth: from rod growth to diffusionless solidification“
P. K. Galenko, J. Xu
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 2217 (2022)
Metallische Werkstoffe
„Study on Anomalous Rapid Solidification of Al-35 at%Ni in Microgravity“
M. Reinartz, M. Kolbe, D. M. Herlach, M. Rettenmayr, L. V. Toropova, D. V. Alexandrov, P. K. Galenko
JOM 6 (2022) 2420-2427
Metallische Werkstoffe
„Growth of Two-Dimensional Hexagonal Lattices in the Phase-Field Crystal Model“
V. E. Ankudinov, P. K. Galenko
JETP Letters 12 (2022) 728-734
Metallische Werkstoffe
„Kinetics of rapid growth and melting of Al50Ni50 alloying crystals: phase field theory versus atomistic simulations revisited *
R. E. Rozas, V. Ankudinov, P. K. Galenko
Journal of Physics: Condensed Matter 49 (2022) 494002
Metallische Werkstoffe
„Mathematical modeling of dendrite growth in an Al–Ge alloy with convective flow“
L. V. Toropova, M. Rettenmayr, P. K. Galenko, D. V. Alexandrov
Mathematical Methods in the Applied Sciences 13 (2021) 8069-8081
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
2021
„Oxidation Resistance of Magnesium Alloyed by Different Elements: a Brief Review “
Z. Liu, Z. Xiao, Q. Sun, G. Liu, S. Lippmann, Y. Zhu
Research and Application of Materials Science 3 (2021) 18
Metallische Werkstoffe
„Two-body abrasion resistance of high-carbon metastable austenitic steels“
J. Ingber, S. Lippmann, M. Kunert
Proceedings 30th Anniversary International Conference on Metallurgy and Materials ISBN: 978-80-87294-99-4 (2021) 459-465
Metallische Werkstoffe
„Modeling of liquid film migration in Al-Cu alloys“
H. Fang, S. Lippmann, Q. Zhang, M. Zhu, M. Rettenmayr
Philosophical Transactions of Royal Society A 380 (2021) 20200328
Metallische Werkstoffe
„Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys“
Y. Fang, P. K. Galenko, D. Liu, K. Hack, M. Rettenmayr, S. Lippmann
Philosophical Transactions of Royal Society A 380 (2021) 20200327
Metallische Werkstoffe
„Electric pulse heating device for the analysis of solid/solid phase transformations“
T. Kaaden, V. Tympel, M. Kober, F. Schmidl, M. Rettenmayr, S. Lippmann
Review of Scientific Instruments 92 (2021) 74703
Metallische Werkstoffe
„A temperature gradient evaluation method for determining temperature dependent thermal conductivities“
S. Wilhelmy, A. Zimare, S. Lippmann, M. Rettenmayr
Measurement Science and Technology 32 (2021) 105601
Metallische Werkstoffe
„Specific heat capacity of the intermetallics epsilon-Cu3Sn, eta/eta’-Cu6Sn5, Al3Ni and Al3Ni2“
I. Saenko, H. Engelhardt, P. Hornig, O. Fabrichnaya, S. Lippmann
Calphad Journal 74 (2021) 275-286
Metallische Werkstoffe
„Influence of remaining pristine oxide layers at Ni/NiAl interfaces on Ni3Al phase formation“
M. Seyring, F. Wanierke, T. Kaaden, S. Lippmann, M. Rettenmayr
Materials Characterization 174 (2021) 102294
Metallische Werkstoffe
„Measurement of the Curie temperature based on temperature dependent thermal properties“
S. Wilhelmy, A. Zimare, R. Rettenmayr, S. Lippmann
International Communications in Heat and Mass Transfer 124 (2021) 105239
Metallische Werkstoffe
„Phase Identification in Multi-Phase Cu-Zn/Cu-Al Alloys with Macroscopic Concentration Gradients“
T. Kaaden, M. Rettenmayr, S. Lippmann
Practical Metallography 58 (2021) 1-13
Metallische Werkstoffe
„Changes in the mechanical, structural and electrical properties of glassy carbon due to strontium and silver co-implantation and annealing“
Odutemowo, O. S., Malherbe, J. B., Limbach, R., Wondraczek, L., Wendler, E., Undisz, A., Njoroge, E. G., Idisi, D. O., Dhlamini, M. S.
Applied Surface Science 537 (2021) 147929
Metallische Werkstoffe
„Single Femtosecond Laser-Pulse-Induced Superficial Amorphization and Re-Crystallization of Silicon“
Florian, C., Fischer, D., Freiberg, K., Duwe, M., Sahre, M., Schneider, S., Hertwig, A., KrĂŒger, J., Rettenmayr, M., Beck, U., Undisz, A., Bonse, J.
Materials 14 (2021) 1651
Metallische Werkstoffe
„Early oxidation stages of a Co-Cr-Fe-Mn-Ni-Si complex concentrated alloy with Cr, Mn, and Si contents matching those of 316L stainless steel“
Apell, J., Wonneberger, R., Seyring, M., Stöcker, H., Rettenmayr, M., & Undisz, A.
Corrosion Science 190 (2021) 109642
Metallische Werkstoffe
„Electrochemical growth mechanism of nanoporous platinum layers“
Stanca, S.-E., Vogt, O., Zieger, G., Ihring, A., Dellith, J., Undisz, A., Rettenmayr, M., & Schmidt, H.
Communications Chemistry 4 (2021) 98
Metallische Werkstoffe
„Simultaneous Dimensional and Analytical Characterization of Ordered Nanostructures“
Hönicke, P., Kayser, Y., Nikolaev, K. V., Soltwisch, V., Scheerder, J. E., Fleischmann, C., Siefke, T., Andrle, A., Gwalt, G., Siewert, F., Davis, J., Huth, M., Veloso, A., Loo, R., Skroblin, D., Steinert, M., Undisz, A., Rettenmayr, M., & Beckhoff, B.
Small (2021) 2105776
Metallische Werkstoffe
„Rhodium-Complex-Functionalized and Polydopamine-Coated CdSe@CdS Nanorods for Photocatalytic NAD+ Reduction“
Boecker, M., Micheel, M., Mengele, A. K., Neumann, C., Herberger, T., Marchesi D’Alvise, T., Liu, B., Undisz, A., Rau, S., Turchanin, A., Synatschke, C. V., WĂ€chtler, M., & Weil, T.
ACS Applied Nano Materials 4 (2021) 12913–12919
Metallische Werkstoffe
„Effects of local non-equilibrium in rapid eutectic solidification. Part 1: Statement of the problem and general solution“
J. Xu, P.K. Galenko
Mathematical Methods in the Applied Sciences 44 (2021) 12211-12220
Metallische Werkstoffe
„Effects of local non-equilibrium in rapid eutectic solidification. Part 2: Analysis of effects and comparison to experiment“
J. Xu, M. Rettenmayr, P.K. Galenko
Mathematical Methods in the Applied Sciences 44 (2021) 12271-12282
Metallische Werkstoffe
„Model of Eutectic Transformation Involving Intermetallic Compound“
J. Xu, B. Zhang, P.K. Galenko
Acta Metallugica Sinica 57 (2021) 1320-1332
Metallische Werkstoffe
„Correlated noise effect on the structure formation in the phase-field crystal model“
V. Ankudinov, I. Starodumov, N.P. Kryuchkov, E.V. Yakovlev, S.O. Yurchenko, P.K. Galenko
Mathematical Methods in the Applied Sciences 44 (2021) 12185-12193
Metallische Werkstoffe
„About one unified description of the first- and second-order phase transitions in the phase-field crystal model“
V. Ankudinov, I. Starodumov, P.K. Galenko
Mathematical Methods in the Applied Sciences 44 (2021) 12129-12138
Metallische Werkstoffe
„Convective and conductive selection criteria of a stable dendritic growth and their stitching“
L.V. Toropova, D.V. Alexandrov, P.K. Galenko
Mathematical Methods in the Applied Sciences 44 (2021) 12139-12151
Metallische Werkstoffe
„Analytical solutions to the boundary integral equation: A case of angled dendrites and paraboloids“
D.V. Alexandrov, P.K. Galenko
Mathematical Methods in the Applied Sciences 44 (2021) 12058-12066
Metallische Werkstoffe
„Analytical solutions describing the oblique flow of a viscous incompressible fluid around a dendritic crystal“
D.V. Alexandrov, P.K. Galenko
Mathematical Methods in the Applied Sciences 44
Metallische Werkstoffe
„Mathematical modeling of dendrite growth in an Al-Ge alloy with convective flow“
L. Toropova, M. Rettenmayr, P.K. Galenko, D.V. Alexandrov
Mathematical Methods in the Applied Sciences 44
Metallische Werkstoffe
„Dendrite Growth with Arbitrary Symmetry in the Presence of Convective Heat and Mass Transfer Boundary Conditions“
L. Toropova, D. Alexandrov, P. Galenko
AIP Conference Proceedings 2313 (2021) 030068-1-8
Metallische Werkstoffe
„A review on the theory of stable dendritic growth“
D.V. Alexandrov, P.K. Galenko
Philosophical Transactions of Royal Society A 379 (2021) 20200325-1-29
Metallische Werkstoffe
„The shape of dendritic tips: a test of theory with computations and experiments“
D.V. Alexandrov, L.V. Toropova, E.A. Titova, A. Kao, G. Demange, P.K. Galenko, and M. Rettenmayr
Philosophical Transactions of Royal Society A 379 (2021) 20200326-1-11
Metallische Werkstoffe
„The hodograph equation for slow and fast anisotropic interface propagation“
P.K. Galenko and A. Salhoumi
Philosophical Transactions of Royal Society A 379 (2021) 20200324-1-19
Metallische Werkstoffe
„Kinetics of solid-liquid interface motion in molecular dynamics and phase field model: crystallization of chromium and silicon“
E.T. Karim, M. He, A. Salhoumi, L.V. Zhigilei, P.K. Galenko
Philosophical Transactions of Royal Society A 379 (2021) 20200320-1-14
Metallische Werkstoffe
„Dendritic growth of ice crystals: a test of theory with experiments“
L. V. Toropova, E. A. Titova, D. V. Alexandrov, P.K. Galenko, M. Rettenmayr, A. Kao, G. Demange
Journal of Physics: Condensed Matter 33 (2021) 365402-1-12
Metallische Werkstoffe
„Demonstration of the effect of stirring on nucleation from experiments on the International Space Station using the ISS-EML facility“
A. K. Gangopadhyay, M. E. Sellers, G. P. Bracker, D. Holland-Moritz, D. van Hoesen, S. Koch, P.K. Galenko, A. K. Pauls, R. W. Hyers, K. F. Kelton
npj (Nature Partner Journals) Microgravity 7 (2021) 31-37
Metallische Werkstoffe
„Dendritic tips as an elliptical paraboloid“
D.V. Alexandrov, E.A. Titova, P.K. Galenko, M. Rettenmayr, L.V. Toropova
Journal of Physics: Condensed Matter 33 (2021) 443002-1-16
Metallische Werkstoffe
„Towards the Stable Evolution of Dendrites in the Case of Intense Convection in the Melt“
D.V. Alexandrov, P.K. Galenko
Journal of Physics: Conference Series 2114 (2021) 012043-1-8
Metallische Werkstoffe
„Ultra-short pulsed laser powder bed fusion of Al-Si alloys: Impact of pulse duration and energy in comparison to continuous wave excitation“
T. Ullsperger, D. Liu, B. YĂŒrekli, G. MatthĂ€us, L. Schade, B. Seyfarth, H. Kohl, R. Ramm, M. Rettenmayr, S. Nolte
Additive manufacturing 46 (2021) 102085
Metallische Werkstoffe
„Nucleation and microstructure of single AlSi12 particles rapidly solidified in a fast scanning calorimeter“
B. Yang, Q. Peng, B. Milkereit, A. Springer, D. Liu, M. Rettenmayr, C. Schick, O. Keßler
J. Mater. Sci: Metals & corrosion 56 (2021) 12881-12897
Metallische Werkstoffe
„Nucleation Behavior of a Single Al-20Si Particle Rapidly solidified in a fast scanning calorimeter“
Qin Peng, Bin Yang, Benjamin Milkereit, Dongmei Liu, Armin Springer, Markus Rettenmayr, Christoph Schick, Olaf Keßler
Materials 14 (2021) 2920
Metallische Werkstoffe
„Microstructure and morphology of Si crystals grown in pure Si and Al-Si melts“
Toropova, L.V., Alexandrov, D.V., Rettenmayr, M., Liu, D.
Journal of physics. Condensed matter : an Institute of Physics journal 14 (2021) 34(9)
Metallische Werkstoffe
„Mathematical modeling of bulk and directional crystallization with the moving phase transition layer“
Toropova, L.V., Aseev, D.L., Osipov, S.I., Ivanov, A.A.
Mathematical Methods in the Applied Sciences
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
2020
„The Effect of Flow Regime on Surface Oscillations During Electromagnetic Levitation Experiments“
G.P. Bracker, E.B. Baker, J. Nawer, M.E. Sellers, A.K. Gangopadhyay, K.F. Kelton, X. Xiao, J. Lee, M. Reinartz, S. Burggraf, D.M. Herlach, M. Rettenmayr, D. Matson, R.W. Hyers
High Temperatures - High Pressures 49 (2020) 49-60
Metallische Werkstoffe
„Size Control of GaN Nanocrystals Formed by Ion Implantation in Thermally Grown Silicon Dioxide“
K. Filintoglou, F. Pinakidou, J. Arvanitidis, D. Christofilos, E.C. Paloura, S. Ves, P. Kutza, P. Lorenz, P. Gerlach, E. Wendler, A. Undisz, M. Rettenmayr, O. Milchanin, F.F. Komarov, K. Lorenz, M. Katsinski
Journal of Applied Physics 127 (2020) 34302
Metallische Werkstoffe
„Simultaneous Melting and Solidification of a Columnar Dendritic Microstructure in a Temperature Gradient: Numerical Modeling and Experiments“
C.C. Xiang, Q.Y. Zhang, D.K. Sun, S.H. Zhang, M.F. Zhu, M. Rettenmayr
The European Physical Journal E 43 (2020) 5
Metallische Werkstoffe
„Generation of a Uniformly Coarse Two-Phase Microstructure in a Hypereutectic Ag-Si Alloy“
F.R. Weber, C. Kunz, S. GrĂ€f, F.A. MĂŒller, M. Rettenmayr
Praktische Metallographie – Practical Metallography 57 (2020) 105-115
Metallische Werkstoffe
„Phase-Field Analysis of the Growth of Fast And Slow Crystallites“
I. Nizovtseva, N. Moelans, K. Reuther, M. Rettenmayr, D.V. Alexandrov
The European Physical Journal – Special Topics 229 (2020) 433-437
Metallische Werkstoffe
„Theoretical Modeling of Crystalline Symmetry Order With Dendritic Morphology“
L. Toropova, P.K. Galenko, D.V. Alexandrov, G. Demange, A.R. Kao, M. Rettenmayr
The European Physical Journal – Special Topics 229 (2020) 275-286
Metallische Werkstoffe
„Model Experiment on a Glass Forming Pd-Ni-Cu-P Alloy“
E. Kharanzhevskiy, P.K. Galenko, M. Rettenmayr, S. Koch, R. Wonneberger, W. Dreier, D. Herlach, M. Yagovkina, D. Kirilenko, V. Bershtein, P. Yakushev, L. Egorova, V. Gurin, M. Zamoranskaya, A. Egorov, A. Senchenkov
The European Physical Journal – Special Topics 229 (2020) 157-165
Metallische Werkstoffe
„Bell-Shaped “Dendrite Velocity-Undercooling” Relationship With an Abrupt Drop of Solidification Kinetics in Glass Forming Cu-Zr(-Ni) Melts“
P.K. Galenko, R. Wonneberger, S. Koch, V. Ankudinov, E.V. Kharanzhevskiy, M. Rettenmayr
Journal of Crystal Growth 532 (2020) 125411
Metallische Werkstoffe
„The Role of Intense Convective Flow on Dendrites Evolving with N-Fold Symmetry“
L.V. Toropova, D.V. Alexandrov, M. Rettenmayr, P.K. Galenko
Journal of Crystal Growth 535 (2020) 125540
Metallische Werkstoffe
„Morphology Control During Heat Treatment of GeTe-PbTe Alloys“
F. Ebrahimi, D.M. Liu, H. Engelhardt, M. Rettenmayr
Praktische Metallographie – Practical Metallography 57 (2020) 250-259
Metallische Werkstoffe
„Copper Thiophosphate (Cu3PS4) as Electrode for Sodium-Ion-Batteries With Ether Electrolyte“
W. Brehm, A. Turchanin, M. Seyring, M. Rettenmayr , P. Adelhelm
Advanced Functional Materials 30 (2020) 1910583
Metallische Werkstoffe
„Bridging the Gap Between High-Temperature And Low-Temperature Oxidation of 316L“
R. Wonneberger, B. Abendroth, H. Stöcker, S. Lippmann, M. Rettenmayr, A. Undisz
Corrosion Science 175 (2020) 108884
Metallische Werkstoffe
„Evaluation Methods for Non-Contact Bend And Free Recovery Tests of Thin NiTi Wires And Their Effects on Measured Transformation Temperatures“
J. Apell, M. Rettenmayr, A. Undisz
Journal of Materials Engineering and Performance 29 (2020) 5435-5441
Metallische Werkstoffe
„Non-Axisymmetric Growth of Dendrite With Arbitrary Symmetry in Two and Three Dimensions: Sharp Interface Model vs. Phase Field Model “
L. Toropova, P.K. Galenko, D.V. Alexandrov, M. Rettenmayr, A.R. Kao, G. Demange
European Physical Journal – Special Topics 229 (2020) 2899-2909
Metallische Werkstoffe
„Resolidification of a Mushy-Zone and Directional Solidification: a High-Throughput Method for Efficient Alloy Development Demonstrated Using the Example of Cu-Zn-Ga System “
M. Salge, G. Wiehl, K. Hack, M. Rettenmayr
Scientific Reports 10 (2020) 21705
Metallische Werkstoffe
„Hydrogen transport through the V-Cr-Al alloys: hydrogen solution, permeation and thermal-stability “
F.F. Huang, X.Z. Li, X.R. Shan, J.J. Guo, F. Gallucci, M. van Annaland, D.M. Liu
Separation and Purification Technology 24 (2020) 116654
Metallische Werkstoffe
„Degradation of Pd/Nb30Ti35Co35/Pd hydrogen permeable membrane: a numerical description “
X. Liang, X.Z. Li, H. Nagaumi, J.J. Guo, F. Gallucci, M. van Annaland, D.M. Liu
Journal of membrane science 601 (2020) 117922
Metallische Werkstoffe
„Improving hydrogen permeability and sustainability of Nb30Ti35Co35 eutectic alloy membrane by substituting Co using Fe “
K.J. Zhu, X.Z. Li, G.H. Liu, Y.X. Yang, J.J. Guo, Z.D. Wang, D.M. Liu
International Journal of Hydrogen Energy 45 (2020) 30720-30730
Metallische Werkstoffe
„Microstructural aspects of additive manufacturing of Al\\Li alloys with high Li content “
D.M. Liu, B. Yürekli, T. Ullsperger, G. MatthĂ€us, L. Schade, S. Nolte, M. Rettenmayr
Materials and Design198 (2020) 109323
Metallische Werkstoffe
„Additive manufacturing of binary Al-Li alloys “
B. Yürekli, L. Schade, T. Ullsperger, B.Seyfarth, H. Kohl, G. MatthĂ€us, D.M. Liu, M. Rettenmayr, S. Nolte
Procedia CIRP 94 (2020) 69-73
Metallische Werkstoffe
„Occurrence and morphology of martensite in ÎČ-Cu-Zn alloys with minor Al additions “
T. Kaaden, P. Wutzler, S. Lippmann
Metallurgical and Materials Transaction A 51 (2020) 34033409
Metallische Werkstoffe
„Analytical solution of a binary melt solidification model in the presence of a quasi-equilibrium mushy region for the case of the non-linear phase diagram “
I. G. Nizovtseva, I. O. Starodumov, D.V. Alexandrov
Journal of Physics Condenced Matter32 (2020) 304003
Metallische Werkstoffe
„Traveling waves of the solidification and melting of cubic crystal lattices “
V. Ankudinov, K.R. Elder, P.K. Galenko
Physical Review E 102 (2020) 062802-1-14
Metallische Werkstoffe
„A stable dendritic growth with forced convection: a test of theory with enthalpy method “
A. Kao, L.V. Toropova, I. Krastins, G. Demange, D.V. Alexandrov, P.K. Galenko
JOM72 (2020) 3123–3131
Metallische Werkstoffe
„Preface to special issue «Crystallization: Computer Models and Experiment» “
P.K.Galenko, M.D. Krivilyov, E.V. Kharanzhevskiy
Journal of Crystal Growth540 (2020) 125655
Metallische Werkstoffe
„Growth of different faces in a body centered cubic lattice: a case of the phase-field-crystal modeling “
V. Ankudinov, P.K. Galenko
Journal of Crystal Growth539 (2020) 125608-1-5
Metallische Werkstoffe
„Thin interface limit of the double sided phase field model with convection “
A. Subhedar, P.K. Galenko, F. Varnik
Philosophical Transactions of Royal Society A 378 (2020) 20190540-1-20
Metallische Werkstoffe
„A shape of dendritic tips “
D.V. Alexandrov, P.K. Galenko
Philosophical Transactions of Royal Society A 378 (2020) 20190243-1-17
Metallische Werkstoffe
„Fast traveling waves in the phase-field theory: effective mobility approach versus kinetic energy approach “
A. Salhoumi and P.K. Galenko
Journal of Physics: Condensed Matter 32 (2020) 204003-1-10
Metallische Werkstoffe
„Modeling of dendrite growth from undercooled nickel melts: sharp interface model versus enthalpy method “
A. Kao, L.V. Toropova, D.V. Alexandrov, G. Demange, P.K. Galenko
Journal of Physics: Condensed Matter 32 (2020) 194002-1-8
Metallische Werkstoffe
„Diffuse interface models of solidification with convection: The choice of a finite interface thickness “
A. Subhedar, P.K. Galenko, F. Varnik
European Physical Journal – Special Topics 229 (2020) 447-452
Metallische Werkstoffe
„Hodograph-equation for rapid solidiïŹcation of Si–0.1 at.% As alloy melt “
A. Salhoumi, D.V. Alexandrov, P.K. Galenko
European Physical Journal – Special Topics 229 (2020) 439-445
Metallische Werkstoffe
„Boundary interface conditions and solute trapping near the transition to diffusionless solidification “
G.L. Buchbinder, P.K. Galenko
European Physical Journal – Special Topics 229 (2020) 287-294
Metallische Werkstoffe
„Morphological stability diagram for slowly and rapidly solidifying binary systems “
P.K. Galenko, D.A. Danilov
European Physical Journal – Special Topics 229 (2020) 353-364
Metallische Werkstoffe
„Effect of tiny amount of impurity and convective transport on dendrite growth kinetics “
O.V. Kazak, D.V. Alexandrov, P.K. Galenko
European Physical Journal – Special Topics 229 (2020) 239-251
Metallische Werkstoffe
„Thermo-solutal growth of a dendritic crystal in the form of an elliptical paraboloid with forced convection “
K. Titova, D.V. Alexandrov, P.K. Galenko
Journal of Crystal Growth 531 (2020) 125319-1-4
Metallische Werkstoffe
„Kinetic and thermodynamic analysis of high-temperature CO2 corrosion of carbon steel in simulated geothermal NaCl fluids “
N. Mundhenk, S. Carrero, K.G. Knauss, R. Wonneberger, A. Undisz, Y. Wu
Corrosion Science 171 (2020) 108597
Metallische Werkstoffe
„Chemical effects during the formation of various types of femtosecond laser-generated surface structures on titanium alloy “
C. Florian, R. Wonneberger, A. Undisz, S.V. Kirner, K. Wasmut, D. Spaltmann, J. Bonse
Applied Physics A126 (2020) 266
Metallische Werkstoffe
„Microwave AC Resonance Induced Phase Change in Sb2Te3 Nanowires “
P.L. Tse, F. Tian, L.Mugica-Sanchez, O. RĂŒger, A. Undisz, G. Möthrath, C. Ronning, S. Takahashi, J.G. Lu
Nano Letters20 (2020) 8668-8674
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
2019
„Convectionless directional solidification in an extremely confined sample geometry“
K. Reuther, M. Seyring, M. A. Schmidt, M. Rettenmayr
Materialia 8 (2019) 100457/1-6
Metallische Werkstoffe
„The effect of adding Al on the occurrence and progress of massive transformation in Cu-Zn“
S. Lippmann, T. Kaaden, P. Wutzler, M. Rettenmayr
Materialia 7 (2019) 100367/1-7
Metallische Werkstoffe
„Synthesis of pure intermetallic phases on the example of the ternary phase τ1 in the system Al-Fe-Ni“
S. Lippmann, R. H. Kemsies, M. Schick, B. Milkereit, O. Kessler, M. Rettenmayr, K. Hack
Intermetallics 105 (2019) 107-112
Metallische Werkstoffe
„Specifically designed concentration profiles created by sudden velocity changes during directional solidification“
H. Engelhardt, D. Liu, S. Lippmann, M. Rettenmayr
Journal of Crystal Growth 506 (2019) 97-101
Metallische Werkstoffe
„A comparison of methods for the calculation of interface curvature in two-dimensional cellular automata solidification models.“
K. Reuther, M. Rettenmayr
Computational Materials Science 166 (2019) 143-149
Metallische Werkstoffe
„Thermodynamics of rapid solidification and crystal growth kinetics in glass-forming alloys“
P. K. Galenko, V. Ankudinov, K. Reuther, M. Rettenmayr, A. Salhoumi, E. V. Kharanzhevskiy
Philosophical Transactions of the Royal Society A 377 (2019) 20180205
Metallische Werkstoffe
„Solute trapping in non-equilibrium solidification: A comparative model study“
K. Reuther, S. Hubig, I. Steinbach, M. Rettenmayr
Materialia 6 (2019) 100256
Metallische Werkstoffe
„Dynamic instability of the steady state of a planar front during non-equilibrium solidification of binary alloys“
K. Reuther, M. Rettenmayr, P.K. Galenko
Journal of Crystal Growth 506 (2019) 55-60
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
2018
„Structural and Surface Changes in Glassy Carbon Due to Strontium Implantation and Heat Treatment“
O. Odutemowo, E. Njoroge, J. Malherbe, L. Prinsloo, R. Erasmus, E. Wendler, A. Undisz, M. Rettenmayr
Journal of Nuclear Materials 498 (2018) 103-116
Metallische Werkstoffe
„Laser Additive Manufacturing of Contact Materials“
S. Szemkus, B. Kempf, G. Wiehl, F. Heringhaus, S. Jahn, M. Rettenmayr
Journal of Materials Processing Technology 252 (2018) 612-617
Metallische Werkstoffe
„Phase formation in the ternary systems Li-Sn-C and Li-Sn-Si“
M. Seyring , M. Drüe, A. Kozlov, S.-M. Liang, R. Schmid-Fetzer, M. Rettenmayr
Thermochimica Acta 659 (2018) 34-38
Metallische Werkstoffe
„Kinetic Transition in the Order-Disorder Transformation at a Solid/Liquid Interface“
P.K. Galenko, I.G. Nizovtseva, K. Reuther, M. Rettenmayr
Philosophical Transactions A 376 (2018) 20170207
Metallische Werkstoffe
„Ion Dynamics at Carbon-Grafted-Polypyrrole Electrode-Electrolyte Interfaces: Study on Charge Carrier Mobility And Ion Co-Adsorption in Liquid and Hydrogel Electrolytes by Electrochemical, Gravimetric and Computational Methods“
M. Radtke, M. Rettenmayr, A. Ignaszak
Journal of Physical Chemistry C 122 (2018) 1890-1902
Metallische Werkstoffe
„Determining Solid/Liquid Interfacial Energies in Al-Cu by Curvature Controlled Melting Point Depression“
S. Lippmann, C. Simon, S. Bode, M. Seyring, U.S. Schubert, G. Wilde, M. Rettenmayr
Acta Materialia 147 (2018) 113-121
Metallische Werkstoffe
„Microstructural Evolution During Temperature Gradient Zone Melting: Cellular Automaton Simulation and Experiment“
Q.Y. Zhang, H. Xue, Q.Y. Tang, S.Y. Pan, M. Rettenmayr, M.F. Zhu
Computational Materials Science 146 (2018) 204-212
Metallische Werkstoffe
„Development of Nb35Mo5Ti30Ni30 Alloy Membrane for Hydrogen Separation Applications
X.Z. Li, H.Y. Geng, R.R. Chen, Y.Q. Su, H., Li, H.Z. Fu, J.J. Guo, M. Rettenmayr, D.M. Liu
Journal of Membrane Science 553 (2018) 171-179
Metallische Werkstoffe
„Reduced Thermal Conductivity of Bi-In-Te Thermoelectric Alloys in Directionally Solidified Eutectics“
D.M. Liu, C. Dressler, M. Seyring, S. Teichert, M. Rettenmayr
Journal of Alloys and Compounds 748 (2018) 730-736
Metallische Werkstoffe
„Modeling of Melting and Resolidification of Equiaxed Microstructures in a Temperature Gradient“
Q.Y. Zhang, H. Xue, Q.Y. Tang, S.Y. Pan, M. Rettenmayr, M.F. Zhu
Scripta Materialia 151 (2018) 28-32
Metallische Werkstoffe
„Kinetics of the Formation of a Disordered Crystal During High Speed Solidification“
P.K. Galenko, I. Nizovtseva, K. Reuther, M. Rettenmayr
Journal of Experimental and Theoretical Physics 127 (2018) 107-114
Metallische Werkstoffe
„Reduced Wettability of Solids by a Liquid Ga-In-Sn Alloy in a Steady Magnetic Field“
C.J. Li, Y. Cao, S. Lippmann, Z.M. Ren, M. Rettenmayr
Journal of Physical Chemistry C 122 (2018) 27451-27455
Metallische Werkstoffe
„Surface enhanced Raman spectroscopy-detection of the uptake of mannose-modified nanoparticles by macrophages in vitro: A model for detection of vulnerable atherosclerotic plaques“
V. Dugandzic, D. Drikermann, O. Ryabchykov, A. Undisz, I. Vilotijevic, S. Lorkowski, T.W. Bocklitz, C. Matthaus, K. Weber, D. Cialla-May, J. Popp
Journal of Biophotonics 11 (2018) UNSPe201800013
Metallische Werkstoffe
„Enhanced Underooling of Para- and Diamagnetic Metal Melts in Steady Magnetic Field“
R. Guo, C.J. Li, S.Y. He, J. Wang, W. D. Xuan, X. Li, Y.B. Zhong, Z.M. Ren
Japanese Journal of Applied Physics 57 (2018) 80301
Metallische Werkstoffe
Comment on „Hot workability of a NiTiCu shape memory alloy with acicular martensite phase based on processing maps“
A. Undisz
Intermetallics 93 (2018) 227
Metallische Werkstoffe
„Thermo-Solutal Growth of an Anisotropic Dendrite With Six-fold Symmetry“
D.V. Alexandrov, P.K. Galenko
Journal of Physics – Condensed Matter 30 (2018) 105702
Metallische Werkstoffe
„Thermo-Solutal and Kinetic Modes of Stable Dendritic Growth With Different Symmetries of Crystalline Anisotropy in the Presence of Convection“
D.V. Alexandrov, P.K. Galenko, L.V. Toropova
Philosophical Transactions of the Royal Society A 376 (2018) 20170215
Metallische Werkstoffe
„From Atomistic Interfaces to Dendritic Patterns“
P.K. Galenko, D.V. Alexandrov
Philosophical Transactions of the Royal Society A 376 (2018) 20170210
Metallische Werkstoffe
„The Boundary Integral Theory for Slow and Rapid Curved Solid/Liquid Interfaces Propagating Into Binary Systems“
P.K. Galenko, D.V. Alexandrov, E.A. Titova
Philosophical Transactions of the Royal Society A 376 (2018) 20170218
Metallische Werkstoffe
„Coarse Graining for Fast Dynamics of Order Parameters in the Phase-field Model“
D. Jou, P.K. Galenko
Philosophical Transactions of the Royal Society A 376 (2018) 20170203
Metallische Werkstoffe
„Travelling-Wave Amplitudes as Solutions of the Phase-field Crystal Equation“
I.K. Nizovtseva, P.K. Galenko
Philosophical Transactions of the Royal Society A 376 (2018) 20170202
Metallische Werkstoffe
„Boundary Condition and Heat Resistance at the Moving Solid-Liquid Interface“
G.L. Buchbinder, P.K. Galenko
Physica A 489 (2018) 149-162
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
2017
„Phase formation in alloy-type anode materials in the quaternary system Li-Sn-Si-C“
M. Drüe, S.-M. Liang, M. Seyring, A. Kozlov, X. Song, M. Rettenmayr, R. Schmid-Fetzer
International Journal of Materials Research 108 (2017) 933-941
Metallische Werkstoffe
„The Copper of the Kyffhauser Monument“
A. Undisz, J. Wilke, H. Kolbe, J. Seeger, M. Rettenmayr
Practical Metallography 54(6) (2017) 353-365
Metallische Werkstoffe
„Structural and surface changes in glassy carbon due to strontium implantation and heat treatment“
O. S. Odutemowo, J. B. Malherbe, L.C. Prinsloo, E. G. Njoroge, R. Erasmus, E. Wendler, A. Undisz, M. Rettenmayr
Journal of Nuclear Materials 498 (2017) 103-116
Metallische Werkstoffe
„Influence of carbon source and synthesis temperature on structural and morphological properties of carbon nanofibers synthesized on tubular porous ZrO2 layers“
A. Simon, M. Seyring, N. Reger-Wagner, H. Richter, I. Voigt, M. Rettenmayr, U. Ritter
Diamond and Related Materials 78 (2017) 88-96
Metallische Werkstoffe
„Effect of convective transport on dendritic crystal growth from pure and alloy melts“
P. K. Galenko, K. Reuther, O. V. Kazak, D. V. Alexandrov, M. Rettenmayr
Applied Physics Leters 111 (2017) 031602
Metallische Werkstoffe
„Effect of annealing on the sub-bandgap, defects and trapping states of ZnO nanostructures“
R. A. Wahyuono, F. Hermann-Westendorf, A. Dellith, C. Schmidt, J. Dellith, J. Plentz, M. Schulz, M. Presselt, M. Seyring, M. Rettenmayr, B. Dietzek
Chemical Physics 483-484 (2017) 112-121
Metallische Werkstoffe
„Phase formation and microstructure in lithium-carbon intercalation compounds during lithium uptake and release“
M. Drüe, M. Seyring, M. Rettenmayr
Journal of Power Sources 353 (2017) 58-66
Metallische Werkstoffe
„Key experiments and challenging thermodynamic modeling of the Li-Si-C system“
S.-M. Liang, M. Drüe, A. Kozlov, M. Rettenmayr, R. Schmid-Fetzer
Journal of Alloys and Compounds 698 (2017) 743-753
Metallische Werkstoffe
„Design of (Nb, Mo)40Ti30Ni30 alloy membranes for combined enhancement of hydrogen permeability and embrittlement resistance“
X. Li, X. Liang, D. Liu, R. Chen, F. Huang, W. Rui, M. Rettenmayr, Y. Su, J. Guo, H. Fu
Scientific Reports 7 (2017) 209
Metallische Werkstoffe
„ Anisotropic layered Bi2Te3-In2Te3 composites: control of interface density for tuning of thermoelectric properties“
D. Liu, X. Li, P. Miguel de Castro Borlido, S. Botti, R. Schmechel, M. Rettenmayr
Scientific Reports 2017 7 (2017) 43611
Metallische Werkstoffe
„Quantitative crystallographic analysis of individual carbon nanofibers using high resolution transmission electron microscopy and electron diffraction“
M. Seyring, A. Simon, I. Voigt, U. Ritter, M. Rettenmayr
Carbon 116 (2017) 347-355
Metallische Werkstoffe
„A classical description of subnanometer resolution by atomic features in metallic structures“
S. Trautmann, J., Aizpurua, I. Götz, A. Undisz, J. Dellith, H. Schneidewind, M. Rettenmayr, V. Deckert
Nanoscale 9 2017 391-401
Metallische Werkstoffe
„Effect of convective flow on stable dendritic growth in rapid solidification of a binary alloy“
P.K. Galenko, D.A. Danilov, K. Reuther, D.V. Alexandrov, M. Rettenmayr, D.M. Herlach
Journal of Crystal Growth 457 (2017) 349-355
Metallische Werkstoffe
„Optical Assets of In situ Electro-assembled Platinum Black Nanolayers“
S.E. Stanca, F. HĂ€nschke, G. Zieger, J. Dellith, A. Ihring, A. Undisz, H.-G. Meyer
Scientific Reports 7 (2017) 14955
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
2016
„Materialographic Preparation of Lithium-Carbon Intercalation Compounds“
M. DrĂŒe, M. Seyring, A. Grasemann, M. Rettenmayr
Practical Metallography 53 (2016) 745-759
Metallische Werkstoffe
„ZnO Nanostructures-based Dye-sensitized Solar Cells using TEMPO+/TEMPO Redox Mediator and Ruthenium(II) Photosensitizers with 1,2,3-Triazole-derived Ligands“
R. A. Wahyuono, B. Schulze, M. Rusu, M. WĂ€chtler, J. Dellith, M. Seyring, M. Rettenmayr, J. Plentz, A. Ignaszak, U. S. Schubert, B. Dietzek
ChemPlusChem August 2016 DOI: 10.1002/cplu.201600377
Metallische Werkstoffe
„ZnO nanoflowers-based photoanodes: aqueous chemical synthesis, microstructure and optical properties“
R. A. Wahyuono, C. Schmidt, A. Dellith, J. Dellith, M. Schulz, M. Seyring, M. Rettenmayr, J. Plentz, B. Dietzek
Open Chemistry 14 (2016) 158-169
Metallische Werkstoffe
„Hydrogen transport behavior of as-cast, cold rolled and annealed Nb40Ti30Co30 alloy membranes“
X. Li, D. Liu, X. Liang, R. Chen, M. Rettenmayr, Y. Su, J. Guo, H. Fu
Journal of Membrane Science 514 (2016) 294-304
Metallische Werkstoffe
„Gold-Nickel Alloy Nanowires Integrated into Silica Optical Microstructured Fibers“
C. Jain, A. Tuniz, K. Reuther, T. Wieduwilt, M. Rettenmayr, M.A. Schmidt
Optical Materials Express 6 (2016) 1790-1799
Metallische Werkstoffe
„Microstructure preparation using glow discharge plasma taking the examples of Ni-Ti, Cu-Zn and a Ni-based alloy“
A. Undisz, K.E. Freiberg, A. Seide, T. Koenen, M. Rettenmayr
Practical Metallography 53 (2016) 193-205
Metallische Werkstoffe
„Surface preserving targeted preparation using focused ion beam demonstrated by the example of oxide layers on Ni-Ti alloys“
K.E. Freiberg, R. Hanke, M. Rettenmayr, A. Undisz
Practical Metallography 53 (2016) 86-97
Metallische Werkstoffe
„Effect of Interdendritic Thermoelectric Magnetic Convection on Evolution of Tertiary Dendrite During Directional Solidification“
H. Zhong, C.J. Li, Z.M. Ren, M. Rettenmayr, Y.B. Zhong, J.B. Yu
Journal of Crystal Growth 439 (2016) 66-73
Metallische Werkstoffe
„Reactive Wetting of Alumina by Ti-rich Ni-Ti-Zr alloys“
P. Siegmund, M. Rettenmayr
Journal of Materials Science 51 (2016) 3693-3700
Metallische Werkstoffe
„Determination of Temperature Dependent Thermal Properties Using an Inverse Method and an Infrared Line Camera“
Q.Y. Zhang, S. Lippmann, A. Grasemann, M.F. Zhu, M. Rettenmayr
Int. Journal of Heat and Mass Transfer 96 (2016) 242-248
Metallische Werkstoffe
„Anisotropic n-type Bi2Te3-In2Te3 Thermoelectric Material Produced by Seeding Zone Melting and Solid State Transformation“
D.M. Liu, J. Stötzel, M. Seyring, M. Drüe, X.Z. Li, R. Schmechel, M. Rettenmayr
Crystal Growth and Design 16 (2016) 617-624
Metallische Werkstoffe
„Modeling the temperature and concentration dependent solid/liquid interfacial energy“
S. Lippmann, I.H. Jung, M. Paliwal, M. Rettenmayr
Philosophical Magazine 96 (2016) 1-14
Metallische Werkstoffe
„Two-Step Annealing For Refining Bi2Te3-In2Te3 Lamellar Structures For Enhanced Thermoelectric Properties“
D.M. Liu, X.Z. Li, R. Schmechel, M. Rettenmayr
Journal of Electronic Materials 45 (2016) 1654-1660
Metallische Werkstoffe
„Quaternary Al-Mg-Si-Cu Q-Phase: Sample Preparation, Heat Capacity Measurement and First-Principle Calculations“
A. Löffler, A. Zendegani, J. Gröbner, M. Hampl, R. Schmid-Fetzer, H. Engelhardt, M. Rettenmayr, F. Körmann, T. Hickel, J. Neugebauer
Journal of Phase Equilibria and Diffusion 37 (2016) 119-126
Metallische Werkstoffe
„Li-Sn Binary Phase Diagram Evaluation“
S. Lippmann, I. Saenko, L. A. Dreval, A. Watson
in G. Effenberg (ed.): MSI Eureka (2016), www.msi-eureka.com
Metallische Werkstoffe
„Atomic density functional and diagram of structures in the phase field crystal model“
V.E. Ankudinov, P.K. Galenko, N.V. Kropotin, M.D. Krivilyov
Journal of Experimental and Theoretical Physics 122(2) (2016) 298-309
Metallische Werkstoffe
„Gibbs-Thomson condition for the rapidly moving interface in a binary system“
A. Salhoumi and P.K. Galenko
Physica A 447 (2016) 161-171
Metallische Werkstoffe
„Dendritic growth velocities in an undercooled melt of pure nickel under static magnetic fields: a test of theory with convection“
J. Gao, M. Han, A. Kao, K. Pericleous, D.V. Alexandrov, P.K. Galenko
Acta Materialia 103 (2016) 184-191
Metallische Werkstoffe
„Three dimensional structures predicted by the modified phase field crystal equation“
J. Bueno, I. Starodumov, H. Gomez, P. Galenko, D. Alexandrov
Computational Materials Science 111 (2016) 310-312
Metallische Werkstoffe
„Bulk Crystallization in a SiO2/Al2O3/Y2O3/AlF3/B2O3/Na2O Glass: Fivefold Pseudo Symmetry due to Monoclinic Growth in a Glassy Matrix Containing Growth Barriers“
W. Wisniewski, M. Seyring, C. Patzig, T. Höche, A. Keshavarzi, C. RĂŒssel
Scientific Reports 6 (2016) 19465
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
2015
„Phase formation in the ternary system Li-Si-C“
M. Drüe, A. Kozlov, M. Seyring, X. Song, R. Schmid-Fetzer, M. Rettenmayr
Journal of Alloys and Compounds 653 (2015) 474-479
Metallische Werkstoffe
„Catalytic Nanoflowers: Synthesis, Characterization And The Activity Toward Electrochemical Oxygen Reduction
S. Tymen, A. Undisz, M. Rettenmayr, A. Ignaszak
Journal of Materials Research 30 (2015) 2327-2339
Metallische Werkstoffe
„Microstructural Stability And Its Effect on Hydrogen Permeability in Equiaxed and Directionally Solidified Nb30Ti35Co35Alloys
X.Z. Li, X. Liang, D.M. Liu, R.R. Chen, E.H. Yan, M. Rettenmayr, Y.Q. Su, J.J. Guo, H.Z. Fu
International Journal of Hydrogen Energy 40 (2015) 9026-9031
Metallische Werkstoffe
„Order-Disorder Transformation in a Nanocrystalline SmCo7 alloy
M. Seyring, X.Y. Song, Z.X. Zhang, M. Rettenmayr
Nanoscale 7 (2015) 12126-12132
Metallische Werkstoffe
„Diffusion in a Temperature Gradient - A Single Cycle Method to Determine Frequency Factor and Activation Energy of Solid Diffusion Coefficients in Alloys
H. Engelhardt, M. Rettenmayr
Acta Materialia 90 (2015) 212-215
Metallische Werkstoffe
„Carbon Nanotubes An Carbon Nanofibers Perpared on Tubular Porous Ceramic Substrates
A. Simon, S. KĂ€mnitz, H. Richter, I. Voigt, M. Seyring, M. Rettenmayr, U. Ritter
Carbon 90 (2015) 25-33
Metallische Werkstoffe
„Electrochemical Stability of The Polymer-Derived Nitrogen-Doped Carbon: An Elusive Goal?
K. Cong, M. Radtke, S. Stumpf, B. Schröter, D.G.G. McMillan, M. Rettenmayr, A. Ignaszak
Materials for Renewable and Sustainable Energy  4 (2015) 1-11
Metallische Werkstoffe
„Resolidification of The Mushy Zone of Multiphase and Multicomponent Alloys in a Temperature Gradient - Experiments and Modeling
A. Löffler, K. Reuther, H. Engelhardt, D.M. Liu, M. Rettenmayr
Acta Materialia 91 (2015) 35-40
Metallische Werkstoffe
Atomic Layer Deposition of AlN For Thin Membranes Using Trimethylaluminum and H2/N2 Plasma“
S. Goerke, M. Ziegler, A. Ihring, J. Delith, A. Undisz, M. Diegel, S. Anders, U. Huebner, M. Rettenmayr, H.G. Meyer
Applied Surface Science 338 (2015) 35-41
Metallische Werkstoffe
„Characterization of Self-Organized Crystalline Au Nano-Particles Embedded in Epitaxially Grown SrTiO3
H. Bernhardt, C. Katzer, A. Undisz, M. DrĂŒe, M. Rettenmayr, I. Uschmann, F. Schmidl
Journal of Materials Science 30 (2015) 973-980
Metallische Werkstoffe
Microstructure And Hydrogen Permeability Changes of Nb-(Ti,Hf) Alloy Membranes by The Substitution of Ti by Hf“
X.Z. Li, X. Liang, D.M. Liu, R.R. Chen, E.H. Yan, M. Rettenmayr, Y.Q. Su, J.J. Guo, D.M. Xu, H.Z. Fu
Journal of Membrane Science 484, (2015) 3505-3515
Metallische Werkstoffe
„Growth of Oriented BiTeIn Thermoelectric Material by Seeding Zone Melting For The Enhancement of Chemical Homogeneity
D.M. Liu, A. Löffler, H. Engelhardt, M. Rettenmayr
CrystEngComm 17 (2015) 3076-3081
Metallische Werkstoffe
Liquid Droplet Migration Under Static And Dynamic Conditions: Analytical Modeling And Phase Field Simulation“
S.Y. Pan, Q.Y. Zhang, M.F. Zhu, M. Rettenmayr
Acta Materialia 86 (2015) 229-239
Metallische Werkstoffe
„Aqueous Black Colloids of Reticular Nanostructured Gold“
S.E. Stanca, W. Fritzsche, J. Dellith, F. Froehlich, A. Undisz, V. Deckert, C. Krafft, J. Popp
Scientific Reports 51 (2015) 7899
Metallische Werkstoffe
„Fatigue Properties of Strongly Textured Bulk NiW“
K. Reuther, C. Blochwitz, W. Tirschler, S. Jacob, W. Skrotzki
International Journal of Fatigue 75 (2015) 170-174
Metallische Werkstoffe
„Phase Field Modeling of an Abrupt Disappearance of Solute Drag in Rapid Solidification “
H.F. Wang, P. Galenko, X. Zhang, W.W. Kuang, F. Liu, D.M. Herlach
Acta Materialia 90 (2015) 282-291
Metallische Werkstoffe
„On The Mesoscopic Description of Locally Nonequilibrium Solidification of Pure Substances “
V.G. Lebedev, A.A. Lebedeva, P. Galenko
Journal of Experimental and Theoretical Physics 101 (2015) 136-140
Metallische Werkstoffe
„Thermo-solutal And Kinetic Regimes of an Anisotropic Dendrite Growing Under Forced Convective Flow “
D.V. Alexandrov, P. K. Galenko
Physical Chemistry Chemical Physics 17 (2015) 19149-19161
Metallische Werkstoffe
„Solute Redistribution Around Crystal Shapes Growing Under Hyperbolic Mass Transport “
P. K. Galenko, D.A. Danilov, D.V. Alexandrov
International Journal of Heat and Mass Transfer 89 (2015) 1054-1060
Metallische Werkstoffe
„Traveling Wave Profiles for a Crystalline Front Invading Liquid States: Analytical and Numerical Solutions “
P.K. Galenko, F.I. Sanches, K.R. Elder
Physica D: Non-Linear Phenomena 308 (2015) 1-10
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2014
„Simulating Dendritic Solidification Using an Anisotropy Free Meshless Front Tracking Method“
K. Reuther, M. Rettenmayr
Journal of Computational Physics 279 (2014) 63-66
Metallische Werkstoffe
„Perspectives for Cellular Automata for the Simulation of Dendritic Solidification - a Review“
K. Reuther, M. Rettenmayr
Computational Materials Science 95 (2014) 213-220
Metallische Werkstoffe
„Simulation of Liquid Film Migration During Melting
M. Rettenmayr, O. Kashin, S. Lippmann
Solidification and Gravity VI, Materials Sience Forum 790-791 (2014) 127-132
Metallische Werkstoffe
„Local supersaturation during melting in a temperature gradient
S. Lippmann, M. Rettenmayr
Philosophical Magazine Letters 94 (2014) 696-701
Metallische Werkstoffe
„Influence of time-variant temperature gradients on resolidifying mushy zones
A. Löffler, S. Lippmann, D. Liu, M. Rettenmayr
Journal of Crystal Growth 408 (2014) 49-53
Metallische Werkstoffe
„Nb-Hf-Co Alloys With Pronounced High Hydrogen Permeability – a New Family of Metallic Hydrogen Permeation Membranes
E.H. Yan, X.Z. Li, M. Rettenmayr, D.M. Liu, Y.Q. Su, J.J. Guo
International Journal of Hydrogen Energy 39 (2014) 8385-8369
Metallische Werkstoffe
„Kinetics of Dendrite Growth and Dendritic Fragmentation in the Undercooled Co81Cu19 alloy’s melt
P.K. Galenko, M. Kolbe, D.M. Herlach, M. Rettenmayr
Metallurgical Research & Technology 111 (2014) 295-303
Metallische Werkstoffe
Hydrogen Permeation Behavior of Nb30Ti35Ni35-x (x=0...35) Alloys Containing High Fractions of Eutectic
X.Z. Li, E.H. Yan, M. Rettenmayr, D.M. Liu, Y.Q. Su, J.J. Guo
International Journal of Hydrogen Energy 39 (2014) 9366-9374
Metallische Werkstoffe
Experimental Determination of the Nucleation Rate of Melt in a Solid Solution“
S. Lippmann, M. Fink, M. Rettenmayr
Acta Materialia 72 (2014) 32-40
Metallische Werkstoffe
Local Melting/Solidification During Peritectic Solidification in a Steep Temperature Gradient“
D.M. Liu, X.Z. Li, Y.Q. Su, M. Rettenmayr, J.J.Guo, H.Z. Fu
Applied Physics A 116 (2014) 1821-1831
Metallische Werkstoffe
Ru-Dye functionalized Au-TiO2@SiO2 and Au/Pt-TiO2@SiO2 Nanoassemblies for Surface-Plasmon-induced visible Light Photocatalysis“
F. Theil, A. Dellith, J. Dellith, A. Undisz, A. CsĂĄki, W. Fritzsche, M. Schmitt, M. Rettenmayr, J. Popp, B. Dietzek
Journal of Colloid and Interface Science 421 (2014) 114-121
Metallische Werkstoffe
Effect of Thermo-Mechanical Pre-Treatment on Short- and Long-Term Ni Release of Biomedical NiTi“
K. Freiberg, S. Bermer-Streck, M. Kiehntopf, M. Rettenmayr, A. Undisz
Acta Biomaterialia 10 (2014) 2290-2295
Metallische Werkstoffe
Design of Hydrogen Permeable Nb-Ni-Ti Alloys by Correlating thte Microstructures, Solidification Paths and Hydrogen Permeability“
E.H. Yan, X.Z. Li, M. Rettenmayr, D.M. Liu, Y.Q. Su, J.J. Guo, D.M. Xu, H.Z. Fu
International Journal of Hydrogen Energy 39 (2014) 3505-3515
Metallische Werkstoffe
Continuous Culture and Rotating Disc Biofilm Reactor - a Testing device for Reproducible Examination of Microbial Adhesion and Biofilm Formation on Biomaterials“
C. LĂŒdecke, D. Siegismund, M.J. Kujau, E.S.M. Zang, M. Rettenmayr, K.D. Jandt, J. Bossert, M. Roth
PLoS one 9 (2014) e84837
Metallische Werkstoffe
Quantification of the Interaction of Biomaterial Surfaces and Bacterial Pathogens by 3D Modeling“
D. Siegismund, A. Undisz, S. Germerodt, S. Schuster, M. Rettenmayr
Acta Biomaterialia 10 (2014) 267-275
Metallische Werkstoffe
Metallische Werkstoffe
„The Effect of Fluid Flow on The Solidification of Ni2B From The Undercooled Melt“
S. Binder, P.K. Galenko, D.M. Herlach
Journal of Applied Physics 115 (2014) 053511
Metallische Werkstoffe
„A Grand Potential Approach to Phase Field Modeling of Rapid Solidification
D.A. Danilov, V.G. Lebedev, P.K. Galenko
Journal of Non-Equilibrium Thermodynamics 39 (2014) 93-111
Metallische Werkstoffe
„Dendrite Growth Under Forced Convection: Analysis Methods and Experimental Tests
D.V. Alexandrov, P.K. Galenko
Advances in Physical Sciences (Physics Uspekhi) 57 (2014) 771-786
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2013
The Li-C Phase Equilibria
A. Kozlov, M. Seyring, M. DrĂŒe, M. Rettenmayr, R. Schmid-Fetzer
International Journal of Materials Research 104 (2013) 1066-1078
Metallische Werkstoffe
Transient Growth of Solid Nuclei in the Liquid - a Numerical Study on Early Stages of Solidification
M. Fink, M. Rettenmayr
Journal of Crystal Growth 382 (2013) 26-30
Metallische Werkstoffe
Thermodynamic Stability of Li2C2 and LiC6 Lithium Carbon Alloys
M. DrĂŒe, M. Seyring, X. Song, A. Kozlov, R. Schmid-Fetzer, M. Rettenmayr
Journal of Alloys and Compounds 575 (2013) 403-407
Metallische Werkstoffe
A Nanocrystalline Sm-Co Compound for High-Temperature Permanent Magnets
Z.X. Zhang, X.Y. Song, Y.K. Qiao, W.W. Xu, J.X. Zhang, M. Seyring, M. Rettenmayr
Nanoscale 5 (2013) 2279-2284
Metallische Werkstoffe
Quantitative Description of Fibrinogen Adsorption on Biomaterials - A Numerical Study
D. Siegismund, A. Schröter, S. Schuster, M. Rettenmayr
Cellular and Molecular Bioengineering 6 (2013) 210-219
Metallische Werkstoffe
Quantitative Charakterisierung des GefĂŒges von warmumgeformtem Duplexstahl / The Quantitative Metallographical Characterization of Hot Formed Duplex Steels
C. Weidig, N. Schepanski, M. Rettenmayr
Praktische Metallographie, Practical Metallography 50 (2013) 164-176
Metallische Werkstoffe
Substrate-Free Multi-Cellular Aggregates of Human Gingival Fibroblasts - Fabrication, Characterization and Significance for Tissue Regeneration
A. Undisz, E. Geuther, A. Völpel, D.D. Watts, M. Rettenmayr, B.W. Sigusch
Dental Materials 29 (2013) 29-38
Metallische Werkstoffe
Preparation And Phase Stability of Nanocrystalline Li2C2
J.T. He, X.Y. Song, W.W. Xu, Y.Y. Zhou, M. Seyring, M. Rettenmayr
Materials Letters 94 (2013) 176-178
Metallische Werkstoffe
A General Approach towards Shape-controlled Synthesis of Silicon Nanowires
W. Molnar, A. Lugstein, P. Pongratz, M. Seyring, M. Rettenmayr, C. Borschel, C. Ronning, N. Auner, C. Bauch, E. Bertagnolli
Nano Letters 13 (2013) 21-25
Metallische Werkstoffe
Wettability, Surface Energies and Related Hemocompatibility Aspects of Nitinol
S.A. Shabalovskaya, D. Siegismund, E. Heurich, M. Rettenmayr
Materials Science and Engineering C 33 (2013) 127-132
Metallische Werkstoffe
Metallische Werkstoffe
„Spinodally Decomposed Patterns in Rapidly Quenched Co-Cu Melts“
E. Davidoff, P.K. Galenko, D.M. Herlach, M. Kolbe, N. Wanderka
Acta Materialia 61 (2013) 1078-1092
Metallische Werkstoffe
„Diffuse Interface Modeling of Solute Trapping in Rapid Solidification: Predictions of the Hyperbolic Phase-Field Model and Parabolic Model With Finite Interface Dissipation“
L. Zhang, E.V. Danilova, I. Steinbach, D. Medvedev, P.K. Galenko
Acta Materialia 61 (2013) 4155-4168
Metallische Werkstoffe
„Selection Criterion for the Growing Dendritic Tip at the Inner Core Boundary“
D.V. Alexandrov and P.K. Galenko
Journal of Physics A: Mathematical and Theoretical 46 (2013) 195101-1-12
Metallische Werkstoffe
„Selection Criterion of Stable Dendritic Growth at Arbitrary PĂ©clet Numbers With Convection“
D.V. Alexandrov and P.K. Galenko
Physical Review E 87 (2013) 062403-1-5
Metallische Werkstoffe
„Unconditionally Stable Method and Numerical Solution of the Hyperbolic Phase-field Crystal Equation“
P.K. Galenko, H. Gomez, N.V. Kropotin, K.R. Elder
Physical Review E 88 (2013) 013310-1-11
„Synthesis of Composite Coatings Using Rapid Laser Sintering of Metallic Powder Mixtures“
M.D. Krivilev, E.V. Kharanzhevskii, V.G. Lebedev, D.A. Danilov, E.V. Danilova, P.K. Galenko
The Physics of Metals and Metallography 114 (2013) 799-820
„Faceting of a Rough Solid-Liquid Interface of a Metal Induced by Forced Convection“
S. Binder, P.K. Galenko, D.M. Herlach
Philosophical Magazine Letters 93 (2013) 608-617
„Coarse Graining for the Phase-Field Model of Fast Phase Transitions“
D. Jou, P.K. Galenko
Physical Review E 88 (2013) 042151
„Dynamic Deformability of Plasmodium Falciparum - Infected Erythrocrytes Exposed to Artesunate in Vitro“
S. Huang, A. Undisz, M. Diez-Silva, H. Bow M. Dao, J.Y. Han
Integrative Biology 5 (2013) 414-422
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2012
Orientierungs- und Phasenanalyse nanoskaliger Körner mittels Transmissionselektronenmikroskopie
M. Seyring, M. Rettenmayr
Praktische Metallographie 49 (2012) 623-632
Metallische Werkstoffe
Verification of a Model on Melting and Resolidification in a Steep Temperature Gradient
S. Fischer, M. Zaloznik, J.M. Seiler, M. Rettenmayr, H. Combeau
Journal of Alloys and Compounds 540 (2012) 85-88
Metallische Werkstoffe
„Corrosion Resistance, Chemistry and Mechanical Aspects of Nitinol Surfaces Formed in Hydrogen Peroxide Solutions
S. Shabalovskaya, J. Anderegg, A. Undisz,  M. Rettenmayr, G. Rondelli
Journal of Biomedical Materials Research B 100 (2012) 1490-1499
Metallische Werkstoffe
„Host cell deformability is linked to transmission in the human malaria parasite Plasmodium falciparum
M. Aingaran, R. Zhang, S. K. Law, Z. Peng, A. Undisz, E. Meyer, M. Diez-Silva, T. A. Burke, T. Spielmann, C. T. Lim, S. Suresh, M. Dao, M. Marti
Cellular Microbiology 14 (2012) 983-993
Metallische Werkstoffe
„Luminescence properties of Ga-graded Cu(In,Ga)Se-2 thin films
J. Haarstrich, H. Metzner, C. Ronning, A. Undisz, T. Rissom, C. A. Kaufmann, H. W. Schock
Thin Solid Films 520 (2012) 3657-3662
Metallische Werkstoffe
Oxide Layer Growth During Annealing of NiTi“
A. Undisz, F. Schrempel, W. Wesch, M. Rettenmayr
Journal of Biomedical Materials Research A 100 (2012) 1743-1750
Metallische Werkstoffe
On the Coupled Growth of Oxide Phases During Internal Oxidation of Ag-Sn-Bi Alloys
G. Wiehl, B. Kempf, M. Ommer, M. Rettenmayr
International Journal of Materials Research 103 (2012) 283-289
Metallische Werkstoffe
Simulating Phase Transformations by a Meshless Method with Front Tracking
K. Reuther, M. Rettenmayr
Acta Materialia 60 (2012) 2128-2134
Metallische Werkstoffe
Solvus Composition Paths in Ternary Alloys - Experimental Approach and Correlation with Calphad Calculations for the Example Al-Mg-Si
H. Engelhardt, B. Hallstedt, M. DrĂŒe, A. Löffler, M. Schick, M. Rettenmayr
Advanced Engineering Materials 14 (2012) 319-323
Metallische Werkstoffe
Comparison of Phase Field and Cellular Automaton Models for Dendritic Solidification in Al-Cu alloys
A. Choudhury, K. Reuther, E. Wesner, A. August, B. Nestler, M. Rettenmayr
Computational Materials Science 55 (2012) 263-268  
Metallische Werkstoffe
„Solidifying Intermetallic Phases as Bulk Single Phases Using the Examples of Al2Cu and Q-Phase in the Al-Mg-Cu-Si System
A. Löffler, J. Gröbner, M. Hampl, H. Engelhardt, R. Schmid-Fetzer, M. Rettenmayr
Journal of Alloys and Compounds 515 (2012) 123-127
Metallische Werkstoffe
„Solving Diffusion Problems on an Unstructured Amorphous Grid by a Meshless Method“
K. Reuther, B. Sarler, M. Rettenmayr
International Journal of Thermal Sciences 51 (2012) 16-22
Metallische Werkstoffe
„Luminescence Properties of Ga-graded Cu(In,Ga)Se-2 Thin Films“
J. Haarstrich, H. Metzner, C. Ronning, A. Undisz, T. Rissom, C.A. Kaufmann, H.W. Schock
Thin Solid Films 520 (2012) 3675-3662
Metallische Werkstoffe
„Host Cell Deformability is Linked to Transmission in The Human Malaria Parasite Plasmodium Falciparum“
M. Aingaran, R. Zhang, S. K. Law, Z. Peng, A. Undisz, E. Meyer, M. Diez-Silva, T.A. Burke, T. Spielmann, C.T. Lim, S. Suresh, M. Dao, M. Marti
Cellular Microbiology 14 (2012) 983-993
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2011
„Observation of the formation of liquid droplets in steep temperature gradients“
S. Fischer, M. Rettenmayr
Journal of Physics: Conference Series - Materials Science and Engineering 27 (2011) 012019.1-6
Metallische Werkstoffe
„Increased Flux Pinning on YBa2Cu3O7-x Thin Film Devices Through Embedding of Au Nano Particles
C. Katzer, M. Schmidt, P. Michalowski, D. Kuhwald, F. Schmidl, V. Grosse, S. Treiber, C. Stahl, J. Albrecht, U. HĂŒbner, A. Undisz, M. Rettenmayr, G. SchĂŒtz, P. Seidel
EPL-Europhysics Letters 95 (2011) 68005
Metallische Werkstoffe
„Adjustable Zero Thermal Expansion in Antiperovskite Manganese Nitride
X.Y. Song, Z.H. Sun, Q.Z Huang, G.N. Li, M. Rettenmayr, X.M. Liu, M. Seyring, G.H. Rao, F.X. Yin
Advanced Materials 23 (2011) 4690-4694
Metallische Werkstoffe
„Observation of Early Melting Stages of Al-Cu Alloys in a Temperature Gradient
S. Fischer, M. Rettenmayr
International Journal of Materials Research 102 (2011) 1226-1231
Metallische Werkstoffe
„Optical Resonances of Self-organized Monocrystalline Au Nanoparticles Embedded in SrTiO3
S. Christke, C. Katzer, V. Grosse, F. Schmidl, G. Schmidl, W. Fritzsche, J. Petschulat, T. Pertsch, M. Rettenmayr
Optical Materials Express 1 (2011) 890-897
Metallische Werkstoffe
„Orientation Microscopy in the Nanometer Range - Characterizing Grain Boundaries in Nanocrystalline Materials
M. Seyring, X.Y. Song, M. Rettenmayr
ACS Nano 5 (2011) 2580-2586
Metallische Werkstoffe
„Supersaturation and Solute Enrichment and Their Role in Phase Transformations in Metal Alloys
M. Rettenmayr
Pure and Applied Chemistry 83 (2011) 1085-1092
Metallische Werkstoffe
„Zum Mechanismus des Ausscheidens von Ag auf der OberflĂ€che von Ag-Sn-In-Legierungen bei der Inneren Oxidation
G. Wiehl, B. Kempf, M. Rettenmayr
Praktische Metallographie 48 (2011) 101-111
Metallische Werkstoffe
„Occurrence and Origin of Non-martensitic Acicular Artifacts on NiTi
A. Undisz, K. Reuther, H. Reuther, M. Rettenmayr
Acta Materialia 59 (2011) 216-224
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2010
„Predicting Microsegregation in Multicomponent Alloys - Progress in Thermodynamic Consistency
A. Löffler, K. Hack, M. Rettenmayr
International Journal of Materials Research 101 (2010) 1398-1404
Metallische Werkstoffe
„Simulation of Fibrinogen Adsorption on Biomaterials
D. Siegismund, T.F. Keller, K.D. Jandt, M. Rettenmayr
Macromolecular Bioscience 10 (2010) 1216-1223
Metallische Werkstoffe
„FEM Simulation of Linear Friction Welding of Titanium Alloys
J. Sorina-MĂŒller, D. Schneefeld, O. Roder, M. Rettenmayr, W. Fried
Computational Materials Science 48 (2010) 749-758
Metallische Werkstoffe
„Formation of Gold Nanoparticles During Laser Pulsed Laser Deposition on YBa2Cu3O7-δ Thin Films“
V. Grosse, F. Schmidl, P. Seidel, A. Undisz, M. Rettenmayr
Physica Status Solidi Rapid Research Letters 4 (2010) 97-99
Metallische Werkstoffe
„Crystal Structure and Magnetic Performance of Single Phase Nanocrystalline SmCo7 Alloy
Z.X Zhang, X.Y. Song, W.W. Xu, M. Seyring, M. Rettenmayr
Scripta Materialia 62 (2010) 594-597
Metallische Werkstoffe
„On the Mechanism of Noble Metal Exudation During Internal Oxidation of Silver Alloys
G. Schimmel, J. Sorina-MĂŒller, B. Kempf, M. Rettenmayr
Acta Materialia 58 (2010) 2091-2102
Metallische Werkstoffe
„Characterization of Precipitate Evolution in an artificially aged Al-Zn-Mg-Sc-Zr alloy“
L.-M. Wu, M. Seyring, M. Rettenmayr, W.-H. Wang
Materials Science and Engineering A 527 (2010) 1068-1073
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2009
„Solidification and Melting Processes - one of the Fundamental Asymmetries in Nature
M. Rettenmayr
Transactions of the Indian Institute of Metals 62 (2009) 265-268
Metallische Werkstoffe
Ungewöhnliche BildungsrÀume
U. Stolz, M. Rettenmayr
Welt des Kindes 6/2009 (2009) 29-31
Metallische Werkstoffe
Nanoscale Thermodynamic Study on Phase Transformation in the Sm2Co17 Nanocrystalline Alloy
W. Xu, X. Song, N. Lu, M. Seyring, M. Rettenmayr
Nanoscale 1 (2009) 238-244
Metallische Werkstoffe
Morphology and mechanical response of S-B star block copolymer-layered silicate nanocomposites
M. Ganß, B.K. Sathapathy, M. Thunga, U. Staudinger, R. Weidisch, J. Hempel, M. Rettenmayr, D. Jehnichen, A. Garcia-Marcos, H.H. Goertz
European Polymer Journal 45 (2009) 2549-2563
Metallische Werkstoffe
Non-martensitic Needle-like Structures - Ocurrence and Origin“
A. Undisz, M. Rettenmayr
in ESOMAT 2009 – The 8th European Symposium on Martensitic Transformations, P. Sittnr, L. Heller and V. Paidar (eds.)
EDP Sciences (www.esomat.org) 02034 (2009)
DOI: 10.1051/esomat/200902034
Metallische Werkstoffe
Electrochemical Parameters and Biocompatibility of Bare Nitinol Surfaces
S. Shabalovskaya, G. Rondelli, M. Rettenmayr
in ESOMAT 2009 – The 8th European Symposium on Martensitic Transformations, P. Sittnr, L. Heller and V. Paidar (eds.)
EDP Sciences (www.esomat.org) 07014 (2009)
DOI: 10.1051/esomat/200907014
Metallische Werkstoffe
Minimalinvasive Behandlung von angeborenen Herzfehlern
M. Rettenmayr, A. Undisz, S. Shabalovskaya, M. Fink, K. Schmidt
Metall 63 (2009) 369-373
Metallische Werkstoffe
„Nitinol surfaces for implantation
S. Shabalovskaya, A. Undisz, M. Rettenmayr, G. Rondelli
Functional Materials Letters 2 (2009) 67-71
Metallische Werkstoffe
Determination of transformation properties of thin medical grade Ni-Ti wire by high resolution bend and free recovery testing“
A. Undisz, M. Fink, M. Rettenmayr
Journal of Materials Engineering and Performance 18 (2009) 814-817
Metallische Werkstoffe
Nitinol surfaces for implantation
S. Shabalovskaya, G. Rondelli, M. Rettenmayr
Journal of Materials Engineering and Performance 18 (2009) 470-474
Metallische Werkstoffe
Preparation and properties characterization of single-phased Sm2Co17 nanocrystalline bulk
N. Lu, X. Song, M. Seyring, M. Rettenmayr, J. Zhang
Journal of Nanoscience and Nanotechnology 9 (2009) 5141-5144
Metallische Werkstoffe
The electrochemical characteristics of native Nitinol surfaces“
S. Shabalovskaya, G. Rondelli, A. Undisz, J. Anderegg, T.D. Burleigh, M. Rettenmayr
Biomaterials 30 (2009) 3662-3671
Metallische Werkstoffe
„Exudation of Ag and Cu in internally oxidized Ag–Sn–In–(Cu) alloys“
G. Schimmel, B. Kempf, M. Rettenmayr
Materials Letters 63 (2009) 1521-24
Metallische Werkstoffe
„Melting and Remelting Phenomena“
M. Rettenmayr
International Materials Reviews 54 (2009) 1-17
Metallische Werkstoffe
„Characterization of grain structure in nanocrystalline Gadolinium by HRTEM“
M. Seyring, X. Song, A. Chuvilin, U. Kaiser and M. Rettenmayr
Journal of Materials Research 24 (2009) 342-346
Metallische Werkstoffe
„Alloy Development Using Modern Tools“
M. Rettenmayr
International Journal of Materials Research 100 (2009) 153-159
Metallische Werkstoffe
„In situ observation of surface oxide layers on medical grade Ni-Ti alloy during straining
A. Undisz, F. Schrempel, W. Wesch, M. Rettenmayr
Journal of Biomedical Materials Part A 88A (2009) 1000-1009
Metallische Werkstoffe
„Abnormal Crystal Structure Stability of Nanocrystalline Sm2Co17 Permanent Magnet“
X.Y. Song, N.D. Lu, M. Seyring, M. Rettenmayr, W.W. Xu,
Z.X. Zhang, J.X. Zhang
Applied Physics Letters 94 (2009) 023102
Metallische Werkstoffe
„Ion Beam Synthesis of Mn/Sb Cluster in Silicon“
M. Steinert, W. Wesch, A. Undisz, M. Rettenmayr, W.C. Nunes,
R.P. Borges, M. Godinho, R.M. Rubinger, M.C. Carmo, N.A. Sobolev
Journal of Physics D 42 (2009) 035406
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2008
„Massivumwandlungen in niedrig legierten Titanlegierungen
S. Fischer, M. Rettenmayr
SonderbÀnde der Praktischen Metallographie 40 (2008) 696-701
Metallische Werkstoffe
„Microstructural Evolution in Near-Metatectic Cu-Sn Alloys“
M. Stier, M. Rettenmayr
Journal of Crystal Growth 311 (2009) 137-140
Metallische Werkstoffe
„Numerical Study of Steady State Melting of a Binary Alloy“
M. Buchmann, M. Rettenmayr
Journal of Crystal Growth 310 (2008) 4623-4627
Metallische Werkstoffe
„Radiation Damage Formation in InP, InSb, GaAs, GaP, Ge and Si Due to Fast Ions“
A. Kamarou, W. Wesch, A. Undisz, M. Rettenmayr
Physical Review B 78 (2008) 054111
Metallische Werkstoffe
„Response of Austenite Finish Temperature and Phase Transformation Characteristics of Thin Medical Grade Ni-Ti Wire on Short Time Annealing“
A. Undisz, M. Fink, M. Rettenmayr
Scripta Materialia 59 (2008) 979-982
Metallische Werkstoffe
„Study on the Internal Oxidation of Ag-Sn-In Alloys“
G. Schimmel, M. Rettenmayr, B. Kempf, J. Fischer-BĂŒhner
Oxidation of Metals 70 (2008) 25-38
Metallische Werkstoffe
„Modeling Rapid Liquid/Solid and Solid/Liquid Phase Transformations in Al Alloys“
M. Rettenmayr, M. Buchmann
International Journal of Materials Research 99 (2008) 613-617
Metallische Werkstoffe
„Preparation and Characterization of Dysprosium (Dy) Ultrafine Nanostructures“
N.D. Lu, X.Y. Song, J.X. Zhang, X. Yan, M. Rettenmayr
Journal of Nanoscience and Nanotechnology 8 (2008) 961-966
Metallische Werkstoffe
„Preparation and Characterization of Nano Rare Earth“
X. Song, N. Lu, X. Liu, Q. Lu, L. Sun, M. Rettenmayr, F. Yin,
J. Zhang, J. Zhou
New Journal of Physics 10 (2008) 023024
Metallische Werkstoffe
„Non-equilibrium transients during solidification - a numerical study“
M. Buchmann, M. Rettenmayr
Scripta Materialia 58 (2008) 106-109
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2007
„Entwicklung von kornstabilisiertem Niobdraht“
M. Rettenmayr, F. Schölz, B. Spaniol
Metall 61 (2007) 549-553
Metallische Werkstoffe
„Modelling Recrystallization in a Material Containing Two Size Classes of Particles“
X. Song, M. Rettenmayr
Computational Materials Science 40 (2007) 234-245
Metallische Werkstoffe
„On the Mechanism of Internal Oxidation in Platinum-Zirconium Alloys - a TEM Study
A. Undisz, M. Rettenmayr, M. Oechsle
Journal of Alloys and Compounds 438 (2007) 178-183

„Hydrogen Diffusion in Ti-Nb45 at High Hydrogen Contents“
T. Keller, M. Rettenmayr, P. Thiagarajan, H. Wipf
Journal of Alloys and Compounds 437 (2007) 180-185

„Rapid Solidification Theory Revisited - a Consistent Model Based on a Sharp Interface“
M. Buchmann, M. Rettenmayr
Scripta Materialia 57 (2007) 169-172

„Initial Transients During Solid/Liquid Phase Transformations in a Temperature Gradient“
U. Bösenberg, M. Buchmann, M. Rettenmayr
Journal of Crystal Growth 304 (2007) 281-286

„Kinetics of Solute Driven Melting and Solidification“
E. GamsjÀger, J. Svoboda, F.D. Fischer, M. Rettenmayr
Acta Materialia 55 (2007) 2599-2607
Metallische Werkstoffe
„Effect of High Electronic Excitation in Swift Heavy Ion Irradiated Semiconductors"
W. Wesch, A. Kamarou, E. Wendler, A. Undisz, M. Rettenmayr
Nuclear Instruments and Methods in Physics Research B257 (2007) 283-286
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2006
„Swift Heavy Ion Irradiation of InP: Thermal Spike Modeling of Track Formation“
A. Kamarou, W. Wesch, E. Wendler, A. Undisz, M. Rettenmayr
Physical Review B 73 (2006) 184107
Metallische Werkstoffe
„Melting and Solidification - Asymmetries and Consequences“
M. Rettenmayr, M. Buchmann
Materials Science Forum vol. 508, A. RoĂłsz, M. Rettenmayr, Z. Gaczi (eds.), Trans Tech Publications, Uetikon-ZĂŒrich (2006) 205-210
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2005
”Using Directional Solidification to Determine Solid/Liquid Phase Equilibria in Multicomponent Phase Diagrams“
G. Zhao, M. Rettenmayr
Journal of Crystal Growth 279 (2005) 540-550
Metallische Werkstoffe
”Microstructure Evolution During Melting and Resolidification in a Temperature Gradient“
M. Buchmann, M. Rettenmayr
Journal of Crystal Growth 284 (2005) 544-553
Metallische Werkstoffe
”High melting Pb-free solder alloys for die-attach applications“
M. Rettenmayr, P. Lambracht, B. Kempf, M. Graff
Advanced Engineering Materials 7 (2005) 965-969
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2004
”Complex Interface Geometries in Phase Transformations“
H.E. Exner, M. Rettenmayr, C. Mueller
Praktische Metallographie 41 (2004) 443-458
Metallische Werkstoffe
”Quantitative image analysis for evaluation of eutectic fractions in as cast microstructures“
B. Dutta, O. Pompe, M. Rettenmayr
Materials Science and Technology 20 (2004) 1011-1018
Metallische Werkstoffe
”Effect of Ternary Al and Ni Additions on Hydrogen Absorption Behaviour of Ti-45Nb Alloys“
B. Dutta, T. Keller, M. Rettenmayr, U. Jantsch, D.F. Lupton
Materials Science and Engineering A, 382 (2004) 57-63
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2003
”3D Simulation Study of Inhomogeneous Microstructure and its Evolution“
X. Song, M. Rettenmayr, G. Liu
Image Analysis & Stereology 22 (2003) 163-171
Metallische Werkstoffe
”Eigenschaften von dispersionsverfestigten Platinwerkstoffen“
M. Rettenmayr, M. Oechsle, S. Zeuner, W. Krebs
Glas-Ingenieur 13 (2003) 52-58
Metallische Werkstoffe
”Deviations From Local Equilibrium at Migrating Phase Interfaces“
M. Hillert, M. Rettenmayr
Acta Materialia 51 (2003) 2803-2809
Metallische Werkstoffe
”Modelling Microstructure Evolution During Annealing of an Inhomogeneously Deformed Material“
M. Rettenmayr, X. Song
Materials Science and Technology 19 (2003) 173-177
Metallische Werkstoffe
”Study on the Effects of a Deformation Gradient on Recrystallization in a Material Containing Precipitates“
X. Song, M. Rettenmayr
Scripta Materialia 48 (2003) 1123-1128
Metallische Werkstoffe
”Reply: Discussion on Local Equilibrium at Solid/Liquid Interfaces During Melting“
M. Rettenmayr
Scripta Materialia 48 (2003) 315-319
Metallische Werkstoffe
”3D Simulation Study of Inhomogeneous Microstructure and its Evolution“
X. Song, M. Rettenmayr, G. Liu
Proceedings of XIth International Conference on Stereology, G. Liu (ed.) USTB Beijing (2003) p. 9-13
Metallische Werkstoffe
”Komplexe GrenzflĂ€chengeometrien bei Phasenumwandlungen“
E. Exner, M. Rettenmayr
in SonderbÀnde der Praktischen Metallographie G. Petzow (ed.) vol. 34, Progress in Metallography, A. Kneissl, F. Jeglitsch (eds.), MatInfo Werkstoffinformationsgesellschaft, Frankfurt (2003) 3-14
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2002
”Microsegregation and its Effects on Quantity and Morphology of Secondary Phases During Solidification of Al-Fe-Si Alloys“
B. Dutta, M. Rettenmayr
Materials Science and Technology 18 (2002) 1428-1434
Metallische Werkstoffe
”Lead-free BGA Balls - Production Method and Properties“
B. Kempf, M. Graff, O. Hutin, M. Rettenmayr
Journal of Electronic Materials 31 (2002) 1270-1275
Metallische Werkstoffe
”Simulation of Microstructure Evolution in Dispersion Strengthened Platinum Alloys“
M. Rettenmayr, X. Song, M. Oechsle, S. Zeuner
Metall 56 (2002) 559-563
Metallische Werkstoffe
”Modeling Study of Recrystallization and Recovery in Inhomogeneously Pre-Deformed Materials“
X. Song, M. Rettenmayr
Materials Science and Engineering A332 (2002) 153-160
Metallische Werkstoffe
”Zn-Al Based Alloys as Pb-Free Solders for Die-Attaching“
M. Rettenmayr, P. Lambracht, B. Kempf
Journal of Electronic Materials 31 (2002) 278-285
Metallische Werkstoffe
”Thermal Fatigue Resistance in Pb-based Solder Alloys for Electronic Packaging“
P. Lambracht, B. Kempf, M. Rettenmayr
Zeitschrift fĂŒr Metallkunde 93 (2002) 99-105
Metallische Werkstoffe
”Lead Free Soft Solder Die Attach Process for Power Semiconductor Packaging“
C. Tschudin, O. Hutin, S. Arsalane, F. Bartels, P. Lambracht, M. Rettenmayr
SEMICON China 2002 Technical Symposium, SEMI, Shanghai (2002) pp. AH1-AH5
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2001
”Modeling of Recrystallization after Inhomogeneous Pre-Deformation“
X. Song, M. Rettenmayr, C. Mueller, H.E. Exner
Metallurgical and Materials Transactions 32A (2001) 2199-2206
Metallische Werkstoffe
”Simulation of Solutal Remelting“
M. Rettenmayr, O. Warkentin, M. Rappaz, H.E. Exner
Acta Materialia 49 (2001) 2499-2510
Metallische Werkstoffe
”Role of Microsegregation in the Evolution of Secondary Phases During Solidification of Al-Fe-Si alloys“
B. Dutta, M. Rettenmayr
in Euromat 2001 Conference Proceedings, Associazione Italiana di Metallurgia, Milano (2001), ISBN 88-85298-39-7, (CD-ROM)
Metallische Werkstoffe
”Optimization of Thermal Fatigue Resistance in Pb-Based Solder Alloys for Electronic Packaging“
P. Lambracht, M. Rettenmayr, B. Kempf
in Euromat 2001 Conference Proceedings, Associazione Italiana di Metallurgia, Milano (2001), ISBN 88-85298-39-7, (CD-ROM)
Metallische Werkstoffe
”Microstructure Evolution During Recrystallization in an Inhomogeneously Pre-deformed Material“
M. Rettenmayr, X. Song
in Euromat 2001 Conference Proceedings, Associazione Italiana di Metallurgia, Milano (2001), ISBN 88-85298-39-7, (CD-ROM)
Metallische Werkstoffe
”Formation of Concentration Gradients in Al-Cu Alloys by Means of a Temperature Gradient in the Mushy Zone“
M. Rettenmayr, C. Wasmund, O. Pompe
in Sonderbaende der Praktische Metallographie G. Petzow (ed.) vol. 32, Progress in Metallography, F. Muecklich (ed.), MatInfo Werkstoffinformationsgesellschaft, Frankfurt (2001) 313-316
Metallische Werkstoffe
”Structure Formation of Activated Nickel Catalysts During Caustic Leaching Nickel-Aluminium Alloys“
S. Knies, G. Miehe, M. Rettenmayr, D.J. Ostgard
Zeitschrift fĂŒr Metallkunde 92 (2001) 596-599
Metallische Werkstoffe
”Combined Monte-Carlo/Deterministic Model of Recrystallization and Recovery“
X. Song, M. Rettenmayr , H.E. Exner, G. Liu
in Recrystallization and Grain Growth, G. Gottstein, D.A. Molodov (eds.), Springer Verlag, Berlin (2001) 1013-1020
Metallische Werkstoffe
”Directional Solidification“
M. Rettenmayr, H.E. Exner
Encyclopedia of Materials: Science and Technology, Elsevier (2001) 2183-2189
Metallische Werkstoffe
”A Model for the Formation of Interdendritic Cavities from Pores Pre-existing in the Melt“
R. Sasikumar, S. Savithri, M. Rettenmayr, H.E. Exner
Zeitschrift fĂŒr Metallkunde 92 (2001) 158-162
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
2000
”An Approximation Method for Calculating Partition Ratios From Experimentally Determined Multicomponent Alloy Phase Diagrams“
A. Roósz, J. Szöke, M. Rettenmayr
Zeitschrift fĂŒr Metallkunde 91 (2000) 1013-1020
Metallische Werkstoffe
”An Experimental Investigation on the Kinetics of Solute Driven Remelting“
B. Dutta, M. Rettenmayr
Metallurgical and Materials Transactions 31A (2000) 2713-2720
Metallische Werkstoffe
”Effect of Cooling Rate on the Solidification Behaviour of Al-Fe-Si Alloys“
B. Dutta, M. Rettenmayr
Materials Science and Engineering 283A (2000) 218-224
Metallische Werkstoffe
”Experimental and Numerical Investigation of Remelting Phenomena“
M. Rettenmayr, O. Warkentin, M. Rappaz
in Solidification and Gravity 2000, Materials Science Forum vols. 329-330, A. RoĂłsz, M. Rettenmayr, D. Watring (eds.), Trans Tech Publications, Uetikon-Zuerich (2000) 339 - 344
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
1999
”Concentration Gradients in Aluminium Alloys Generated by Directional Solidification and Their Effects on Fatigue Crack Propagation“
B. Siber, M. Rettenmayr, C. Mueller, H.E. Exner
in Functionally Graded Materials 1998, W.A. Kaysser (ed.), Materials Science Forum vols. 308-31 , Trans Tech Publications, Uetikon (1999) 211 - 216
Metallische Werkstoffe
”ProzessĂŒbergreifendes Modellieren der GefĂŒgeentwicklung von Aluminiumlegierungen“
M. Rettenmayr, O. Warkentin, H.E. Exner
in Werkstoffwoche 1998, Band VI, R. Kopp, K. Herfurth, D. Boehme, R. Bormann, E. Arzt, H. Riedel (eds.), Wiley-VCH, Weinheim (1999) 761-766
Metallische Werkstoffe
”Voraussetzungen fĂŒr die Anwendung von Mikromodellen der Erstarrung auf technische Prozesse und Legierungen“
M. Rettenmayr
in Erstarrung metallischer Schmelzen, A. Ludwig (ed.), Wiley-VCH, Weinheim (1999)113-118
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
1998
”Fortschritte und Probleme beim Mikromodellieren der Erstarrung“
M. Rettenmayr
Zeitschrift fĂŒr Metallkunde 89 (1998) 744-750
Metallische Werkstoffe
”Microstructural Changes During Quenching“
O. Pompe, M. Rettenmayr
Journal of Crystal Growth 192 (1998) 300-306
Metallische Werkstoffe
”Silizide als Barriere fĂŒr Kornwachstum in TIMETAL1100“
C. Mueller, O. Pompe, M. Rettenmayr
Praktische Metallographie 35 (1998) 424-437
Metallische Werkstoffe
”Simulation of Solidification“
M. Rappaz, M. Rettenmayr
Current Opinion in Solid State & Materials Science 3 (1998) 275-282
Metallische Werkstoffe
”Macroscopic Modeling of the Microstructural Evolution in Castings Using Thermodynamic Formulated Phase Diagrams“
K. Greven, M. Fackeldey, A. Ludwig, T. Kraft, M. Rettenmayr, P. Sahm
in Modeling of Casting, Welding and Advanced Solidification Processes VIII, B.G. Thomas, C. Beckermann (eds.), The Minerals, Metals & Materials Society, Warrendale PA (1998) 187-194
Metallische Werkstoffe
”An Overview on Premises for the Technical Applicability of Solidification Micromodelling“
M. Rettenmayr, H.E. Exner
in Modeling of Casting, Welding and Advanced Solidification Processes VIII, B.G. Thomas, C. Beckermann (eds), The Minerals, Metals & Materials Society, Warrendale PA (1998) 171-178
Metallische Werkstoffe
”Applications of Image Analysis for the Quantitative Characterisation of Microstuctural Defects in Materials“
H.E. Exner, M. Rettenmayr
in Defect Recognition and Image Processing in Semiconductors 1997, Institute of Physics Conference Series No. 160, J. Donecker, I. Rechenberg (eds.), Institute of Physics Publishing, Bristol (1998) 237-243
Metallische Werkstoffe
”GefĂŒgeverĂ€nderungen beim Abschrecken“
O. Pompe, M. Rettenmayr
in SonderbÀnde der Praktischen Metallographie vol. 29, E. Materna-Morris, M. Kurz (eds.), DGM Informationsgesellschaft, Frankfurt (1998) 189-194
Metallische Werkstoffe
”Abschreckeffekte bei Al-Cu-Legierungen“
O. Pompe, M. Rettenmayr
Praktische Metallographie 35 (1998) 203-211
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
1997
”Modeling of Dendritic Solidification for Optimizing Casting and Microstructure Parameters“
T. Kraft, M. Rettenmayr, H.E. Exner
Progress in Materials Science 42 (1997) 277-286
Metallische Werkstoffe
”Dilatometerversuche zur Optimierung diffusionsgefĂŒgter Bauteile aus PM- und Massivstahl“
I. Graef, M. Rettenmayr, H. Cohrt
in Sonderbaende der Praktischen Metallographie vol. 28, W.-U. Kopp, M. Kurz (eds.), DGM Informationsgesellschaft-Verlag, Frankfurt (1997) 279-286
Metallische Werkstoffe
”Results and Opportunities of Micromodelling“
M. Rettenmayr, T. Kraft, H.E. Exner
in Solidification Processing 1997: Proceedings of the 4th Decennial Conference on Solidification Processing, J. Beech and H. Jones (eds.), Dept. of Eng. Mat., University of Sheffield, Sheffield (1997) 372-375
Metallische Werkstoffe
”Numerische Simulation von Mikroseigerungen: Modell und Anwendungen“
T. Kraft, M. Rettenmayr, H.E. Exner
in Proceedings Werkstoffwoche '96, Symposium 8: Simulation, Modellierung, Informationssysteme, J. Hirsch (ed.), DGM Informationsgesellschaft-Verlag, Frankfurt (1997) 77-82
Metallische Werkstoffe
”Interface Instablities on Solidifying Globulitic Particles“
M. Rettenmayr, O. Pompe
Journal of Crystal Growth 173 (1997) 182-188
Metallische Werkstoffe
”Effects of Liquidus and Solidus Curvature in Solidification Modelling of Binary Systems with Constant Partition Ratio“
M. Rettenmayr, T. Kraft
Metallurgical and Materials Transactions 28A (1997) 447-451
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
1996
”Quantitative GefĂŒgeanalyse und Werkstoffverhalten“
H.E. Exner, M. Rettenmayr
Praktische Metallographie 33 (1996) 605-617
Metallische Werkstoffe
”Undercooling Effects in Microsegregation Modelling“
T. Kraft, A. Roosz and M. Rettenmayr
Scripta Materialia 35 (1996) 77-82
Metallische Werkstoffe
”Problems in Assessing Thermodynamic Functions in the Binary Phase Diagram Pd-Sn“
M. Rettenmayr, J. Mattern, B. Kempf
in Proceedings of the General COST 512 Workshop on Modelling in Materials Science and Processing, European Commission, ECSC-EC-EAEC, Brussels (1996) 246-253
Metallische Werkstoffe
”Instability of Coarse Microstructures During Equiaxed Growth“
M. Rettenmayr, O. Pompe
in Materials Science Forum vols. 215-216, A. RoĂłsz, M. Rettenmayr (eds.), Transtec Publications, Zuerich, (1996) 201-208
Metallische Werkstoffe
”An Extended Numerical Procedure for Predicting Microstructure and Microsegregation of Multicomponent Alloys“
T. Kraft, M. Rettenmayr, H.E. Exner
Modelling and Simulation in Materials Science and Engineering 4 (1996) 161-177
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
1994
”Dendritic Solidification of Undercooled Melts: Mushy Zone Recalescence Dynamics“
M.E. Glicksman, L.M. Mizenko, M. Rettenmayr, S.P. Marsh
Materials Science and Engineering A178 (1994) 137-146
Metallische Werkstoffe
”Selected Practical Examples of Predicting Microstructure and Microsegregation: Non-equilibrium Phases in Al-Cu and Ni-Cr-Fe-Mo“
H.E. Exner, T. Kraft, O. Pompe, M. Rettenmayr
in Advanced Casting and Solidification Technology, H. Kleemola, B. Pukl (eds.), European Commission, ECSP-EECC-EAEC, Brussels (1994) 35-45
Metallische Werkstoffe
”Some Recent Developments in Solidification Modelling“
M. Rettenmayr
Proceedings of microCAD '94 International Computer Science Conference, Section D: Materials Science, University of Miskolc, Miskolc, Hungary (1994) 1-8
Metallische Werkstoffe
”Quantification of Crystal Morphology“
M.E. Glicksman, M.B. Koss, V.E. Fradkov, M. Rettenmayr, S.S. Mani
Journal of Crystal Growth 137 (1994) 1-11
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
1992
”Adiabatic Recalescence Kinetics of Alloy Mushy Zones“
L.M. Colucci-Mizenko, M. Rettenmayr, M.E. Glicksman, R.N. Smith
in Micro/Macro Scale Phenomena in Solidification, C. Beckermann, L.A. Bertram, S.J. Pien, R.E. Smelser (eds.), HTD-vol. 218/ AMD-vol.139, ASME New York (1992) 67-72
Metallische Werkstoffe
”Sensitivity of Microsegregation Predictions to the Description of Phase Equilibria“
M. Rettenmayr
in Computational Methods in Materials Science, J.E. Mark, M.E. Glicksman, S.P. Marsh (eds.), Materials Research Society Symposium Proceedings vol. 278, Pittsburgh PA (1992) 325-330
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
1991
”Some Comments on the Present State of Micromodels for Dendritic Solidification“
H.E. Exner, M. Rettenmayr, A. Roosz
in Materials Science Forum vol. 77, P. Barcy (ed.), Trans Tech Publications, Zuerich (1991) 205-210
Metallische Werkstoffe
”Numerical Assessment of Restricted Equilibrium Phase Diagrams for Ternary Cast Alloys“
H.E. Exner, A. Roosz, M. Rettenmayr
in Modeling of Casting, Welding and Advanced Solidification Processes V, M. Rappaz, M.R. Ozgu and K.W. Mahin (eds.), The Minerals, Metals & Materials Society, Warrendale PA (1991) 429-434
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe
1988
”Electron Microscopy of Binder Phase Deformation in WC-Co Alloys“
M. Rettenmayr, H.E. Exner, W. Mader
Materials Science and Technology 4 (1988) 984-990
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
in books
2016
”Germination d’une phase liquide Ă  partir d’une phase solide“
M. Rettenmayr, S. Fischer
Les changements de phase solide-liquide-vapour: fondements et applications, H. Combeau, L. Tadrist (eds.), Verlag CNRS Éditions (Alpha) Paris
Metallische Werkstoffe
2008
”Directional Solidification“ (reprint from 2001)
M. Rettenmayr, H.E. Exner
Encyclopedia of Materials: Science and Technology, Elsevier (2008) 2183-2189
Metallische Werkstoffe
2001
”Directional Solidification“
M. Rettenmayr, H.E. Exner
Encyclopedia of Materials: Science and Technology, Elsevier (2001) 2183-2189
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
as co-editor
2008
"Fortschritte in der Metallographie“
SonderbÀnde der Praktischen Metallographie, G. Petzow (ed.), vol. 40, M. Rettenmayr, A. Kneissl (eds.), Matfo Werkstoffinformationsgesellschaft, Frankfurt/Main (2008)
Metallische Werkstoffe
2005
”Solidification and Gravity 2005“
Materials Science Forum A. RoĂłsz, M. Rettenmayr (eds.), Trans Tech Publications, Uetikon-ZĂŒrich (2005)
Metallische Werkstoffe
2000
”Solidification and Gravity 2000“
Materials Science Forum vols. 329-330, A. RoĂłsz, M. Rettenmayr, D. Watring (eds.), Trans Tech Publications, Uetikon-ZĂŒrich (2000)
Metallische Werkstoffe
1995
”Solidification and Gravity 95“
Materials Science Forum vols. 215-216, A. RoĂłsz, M. Rettenmayr (eds.), Transtec Publications, ZĂŒrich (1996)
Metallische Werkstoffe
Metallische Werkstoffe
Metallische Werkstoffe Metallische Werkstoffe
Metallische Werkstoffe
ImpressumMetallische WerkstoffeMetallische Werkstoffe© by maaja Design & Konzepte